Enable Networks CR3000
Enable Networks CR3000
Manuf (OEM/ODM): Senao WBR2100AFN
FCC approval date: 20 February 2013
Country of manuf.: Taiwan
Type: wireless router
FCC ID: U2M-WBR2100AFN
IC ID: 3616C-WBR2100AFN
Power: 5 VDC, 1 A
Connector type: barrel
CPU1: Atheros AR1321
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Eon Q32B-104HIP)
RAM1: ? MiB (Brand? Model?)
Expansion IFs: none specified
WI1 chip1: Atheros AR1321
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Atheros AR1321
Switch: Atheros AR1321
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: SETUP-XX
Default IP address: 192.168.99.1
the IP 192.168.99.1 is used by 1 additional devices
of which 0 are Enable Networks devices
802dot11 OUI: none specified
| FCC ID | |
|---|---|
| Senao WBR2100AFN | U2M-WBR2100AFN |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
300N Wi-Fi Router with Dragon88 Firmware and CloudCommand XP Service
"7016A056000f" is silkscreened on the board in the FCC photos.
The device, per the FCC photos, seems to be using the following...
- Atheros AR1321-AL1A WiSoC
- Eon Q32B-104HIP (4MB Flash)
Per the FCC label and manual, the default (setup) SSID appears to be SETUP-XX (where XX is the last 2 digits of the UIC [Unit Identification Code]).
Likely 68:51:B7 (PowerCloud Systems) OUI (it's on the FCC label)
