iNexQ (Unex) ISW054t
iNexQ (Unex) ISW054t
FCC approval date: 08 October 2003
(Est.) release date: August 2003
EAN: 4719571030038 (UPC DB, On eBay)
Type: wireless router
FCC ID: I4L-MS6818
Power: 9 VDC, 1.5 A
Connector type: barrel
CPU1: Silicon Data SD9216-BB
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (AMD Am29LV800BT-90EC)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (EtronTech EM638325TS-6)
Expansion IFs: Mini PCI
Mini PCI slots: 1
Serial: yes, internal, 6-pin header, (19200,8,N,1), J213
WI1 module: MSI MP54GS (MS-6818)
WI1 module IF: Mini PCI
WI1 chip1: Intersil ISL3880
WI1 chip2: Intersil ISL3686A
WI1 802dot11 protocols: bg
WI1 antenna connector: U.FL, RP-SMA
ETH chip1: Silicon Data SD9216-BB
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bg
Stock FW OS: ThreadX G4.0.4.0
Default SSID: WLAN (16 addl. devices)
Default IP address: 192.168.62.1
the IP 192.168.62.1 is used by 7 additional devices
of which 0 are iNexQ (Unex) devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 185 additional devices
of which 0 are iNexQ (Unex) devices
| FCC ID | |
|---|---|
| MSI MP54GS (MS-6818) | I4L-MS6818 |
| MSI RG54GS (MS-6822) | I4L-MS6818 |
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Silicon Data chipsets with specifications, see Silicon Data.
The firmware on the router used in this entry is 20-06-07T5, dated 2003-10-22.
"760-05505006 VER:0D" is silkscreened on top the main board. A sticker with "347 820-05505020 Ver.0E" printed on it is affixed to the bottom of the board.
- "MS6818" and "VER:100" is silkscreened on the wireless module.
- This wireless module is an MSI MP54GS (MS-6818). The FCC ID of the wireless module has been assigned to this entry (there is none on the label).
This device is assumed to be using the ThreadX RTOS based on cursory FW examination..
- The version string within the FW is Copyright (c) 1996-2001 Express Logic Inc. * ThreadX LX4189/Green Hills Version G4.0.4.0 *
Additional external links
- Same author w/ another message on the gpl-violations.org mailing list
- the ISW054u would appear to be the same device with a USB port
Images
- external
main
top
front panel
back, ports
bottom
label
- internal
board top
board top, Wi-Fi module removed
SD9218-BB SoC
Flash
RAM
ISL3880IK Wi-Fi BB/MAC
Mini PCI area, without the module
wireless module, top
wireless module, bottom
MAC label
board top, AA, near Mini PCI + PWR, angled right
board top, AA, near SoC, angled left
board top, AA, right back, angled left
board top, AA, right side
board bottom
top casing underside
bottom casing topside
Serial
Pinout
J213 (TxD) (GND) (...) (...) --> R side (+ end) of board (RxD) (GND)
Info derived from
| • boot log |
|---|
Power-On Self Testing...
Testing SYS Controller...
Testing MEM Controller...
SDRAM Configuration:ROW11_COL8_BANK2
Testing SDRAM Memory ...
From 0x80000000 - 0x807FFFFF
Testing CPU Data RAM...
Testing CPU Internal Registers...
Testing Timer 0...
Testing Timer 1...
Testing DMA Controller...
Testing INT Controller...
Testing PCMCIA Controller...
Testing USB Controller...
Testing Ethernet 0 MAC...
Testing Ethernet 1 MAC...
Testing Cardbus...
Testing PCI...
Power-On Self Test Passed
Bootloader Version 00-03-02, Aug 29 2003 21:45:21
Copyright 2003. All rights reserved.
Press any key to stop auto-boot...
0
auto-booting...
========POR reset========
Start of heap: 0x80629f30
End of heap: 0x80800000
Firmware Version: 20-06-07T5, Oct 22 2003 15:46:54
Copyright 2002-2003. All rights reserved.
Scanning PCI Bus...
scan PCI deviceNo=1
Found ISL3890 Wireless Device: PCIDEV=1, DEVNUM=4, NICNO=0
WLAN0 Zone Number is 0
******** WLAN Enabled *******
******* AP CONFIG LAUNCHED *******
WLS Channael number is 6
Finished wlan firmware download
Link State: 6c 00 00 00 34 2e
br0: port 0.0.0.1(eth1 rootport) entering listening state
br0: port 0.0.0.2(wls0 rootport) entering listening state
NAT/Firewall starting...
MaxSessionNumber: 65536
NAT/Firewall started!
Now try to get the configuration file...
interface eth1 uses following ip settings: 192.168.62.1/255.255.255.0
Initialization of NAT/Firewall policy database succeeded!
load_pptp_wan: encryption option=e1
br0: port 0.0.0.2(wls0 rootport) entering learning state
br0: port 0.0.0.1(eth1 rootport) entering learning state
br0: port 0.0.0.2(wls0 rootport) entering forwarding state
br0: topology change detected, propagating
br0: port 0.0.0.1(eth1 rootport) entering forwarding state
br0: topology change detected, propagating
SD9218> dhcp_update_table called, iface=1
start_ip=192.168.62.50, end_ip=192.168.62.100
route_cfg_update: dycfg.tx_protocol=0, dycfg.rx_protocol=0, dycfg.mode=0
dhcp_update_table return
|
| • bootloader menu + boot params |
|---|
BOOT> ?
Main menu
? - print this menu
f - load from Flash and go
l - load from TFTP server to SDRAM (no save to Flash, no go)
L - load from TFTP server to SDRAM and go (no save to Flash)
@ - load from TFTP server to SDRAM,save to Flash and go
g - go from address
b - show boot parameters
c - change boot parameters
d - display factory default parameters
m - modify/set factory default parameters
p - ping test (ping other station from the target)
r - read memory
s - change mac address only
w - write memory
BOOT> b
tftpserver (R/W) 192.168.62.10
tftpfile (R/W) zrtos.img
ipaddr (R/W) 192.168.62.1
subnetmask (R/W) 255.255.255.0
gateway (R/W) 0.0.0.0
|
