Intel Centrino Ultimate-N 6300

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Intel 633AN HMW

FCC approval date: 10 August 2009
Country of manuf.: China

Amazon image

ASIN
B00HRLRJUO (Flag of the United States.svg, On Amazon, On CCC)

Interface: Mini PCIe (half)

ID: 8086:422b SS: 8086:1121
Windows: PCI\VEN_8086&DEV_422B&SUBSYS_11218086

FCC ID: PD9633ANHU, PD9633ANH
IC ID: 1000M-633ANHU, 1000M-633ANH

WI1 chip1: Intel JC82546MDE

WI1 chip2: Intel JC82546RDE

Antenna connector: U.FL

abgn, 3x3:3

Flags: DFS

For a list of all currently documented Intel chipsets with specifications, see Intel.


Intel Centrino Ultimate-N6300 Mini PCIe Wireless Card

3x3 MIMO (Three spatial streams for up to 450Mbps)
Product Brief

  • IBM: FRU 60Y3193 / 60Y3233, Dell: P/N 04W00N, HP: SPS# 572511-001
  • A labeled engineering sample (Go/No Go testing unit) of this card has...
A testing specific label explicitly stating the device is not for resale.
A PCI ID of 8086:422b (8086:1101).
A MAC of 00:15:00:5A:9E:A8.
  • Codes of...
WF EP: 0X434
TA: E65699-004
A date of Jun-18-2009.
A CoO of China.

Additional info

iw list

 • iw list dump (on Ubuntu 14.10)
Wiphy phy0
	max # scan SSIDs: 20
	max scan IEs length: 95 bytes
	Coverage class: 0 (up to 0m)
	Device supports RSN-IBSS.
	Supported Ciphers:
		* WEP40 (00-0f-ac:1)
		* WEP104 (00-0f-ac:5)
		* TKIP (00-0f-ac:2)
		* CCMP (00-0f-ac:4)
	Available Antennas: TX 0 RX 0
	Supported interface modes:
		 * IBSS
		 * managed
		 * monitor
	Band 1:
		Capabilities: 0x1072
			HT20/HT40
			Static SM Power Save
			RX Greenfield
			RX HT20 SGI
			RX HT40 SGI
			No RX STBC
			Max AMSDU length: 3839 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 4 usec (0x05)
		HT TX/RX MCS rate indexes supported: 0-23, 32
		Bitrates (non-HT):
			* 1.0 Mbps
			* 2.0 Mbps (short preamble supported)
			* 5.5 Mbps (short preamble supported)
			* 11.0 Mbps (short preamble supported)
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
		Frequencies:
			* 2412 MHz [1] (15.0 dBm)
			* 2417 MHz [2] (15.0 dBm)
			* 2422 MHz [3] (15.0 dBm)
			* 2427 MHz [4] (15.0 dBm)
			* 2432 MHz [5] (15.0 dBm)
			* 2437 MHz [6] (15.0 dBm)
			* 2442 MHz [7] (15.0 dBm)
			* 2447 MHz [8] (15.0 dBm)
			* 2452 MHz [9] (15.0 dBm)
			* 2457 MHz [10] (15.0 dBm)
			* 2462 MHz [11] (15.0 dBm)
			* 2467 MHz [12] (15.0 dBm) (no IR)
			* 2472 MHz [13] (15.0 dBm) (no IR)
	Band 2:
		Capabilities: 0x1072
			HT20/HT40
			Static SM Power Save
			RX Greenfield
			RX HT20 SGI
			RX HT40 SGI
			No RX STBC
			Max AMSDU length: 3839 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 4 usec (0x05)
		HT TX/RX MCS rate indexes supported: 0-23, 32
		Bitrates (non-HT):
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
		Frequencies:
			* 5180 MHz [36] (15.0 dBm) (no IR)
			* 5200 MHz [40] (15.0 dBm) (no IR)
			* 5220 MHz [44] (15.0 dBm) (no IR)
			* 5240 MHz [48] (15.0 dBm) (no IR)
			* 5260 MHz [52] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5280 MHz [56] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5300 MHz [60] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5320 MHz [64] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5500 MHz [100] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5520 MHz [104] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5540 MHz [108] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5560 MHz [112] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5580 MHz [116] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5600 MHz [120] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5620 MHz [124] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5640 MHz [128] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5660 MHz [132] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5680 MHz [136] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5700 MHz [140] (15.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 2811 sec)
			* 5745 MHz [149] (15.0 dBm) (no IR)
			* 5765 MHz [153] (15.0 dBm) (no IR)
			* 5785 MHz [157] (15.0 dBm) (no IR)
			* 5805 MHz [161] (15.0 dBm) (no IR)
			* 5825 MHz [165] (15.0 dBm) (no IR)
	Supported commands:
		 * new_interface
		 * set_interface
		 * new_key
		 * start_ap
		 * new_station
		 * new_mpath
		 * set_mesh_config
		 * set_bss
		 * authenticate
		 * associate
		 * deauthenticate
		 * disassociate
		 * join_ibss
		 * join_mesh
		 * set_tx_bitrate_mask
		 * frame
		 * frame_wait_cancel
		 * set_wiphy_netns
		 * set_channel
		 * set_wds_peer
		 * probe_client
		 * set_noack_map
		 * register_beacons
		 * start_p2p_device
		 * set_mcast_rate
		 * Unknown command (104)
		 * connect
		 * disconnect
	Supported TX frame types:
		 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
	Supported RX frame types:
		 * IBSS: 0x40 0xb0 0xc0 0xd0
		 * managed: 0x40 0xd0
		 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * mesh point: 0xb0 0xc0 0xd0
		 * P2P-client: 0x40 0xd0
		 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * P2P-device: 0x40 0xd0
	software interface modes (can always be added):
		 * monitor
	interface combinations are not supported
	HT Capability overrides:
		 * MCS: ff ff ff ff ff ff ff ff ff ff
		 * maximum A-MSDU length
		 * supported channel width
		 * short GI for 40 MHz
		 * max A-MPDU length exponent
		 * min MPDU start spacing
	Device supports TX status socket option.
	Device supports HT-IBSS.
	Device supports scan flush.

Variants

6300ANHMW 802.11a/g/n
6300ANHMWEBC 802.11 a/g/n, Extended Availability

pci ids

	422b  Centrino Ultimate-N 6300
		8086 1101  Centrino Ultimate-N 6300 3x3 AGN
		8086 1121  Centrino Ultimate-N 6300 3x3 AGN
	4238  Centrino Ultimate-N 6300
		8086 1111  Centrino Ultimate-N 6300 3x3 AGN