Meru Networks AP1020i
Meru Networks AP1020 i
Availability: now
Manuf (OEM/ODM): USI
FCC approval date: 01 October 2010
(Est.) release date: August 2010
Country of manuf.: China
Type: access point
FCC ID: RE7-AP1020
IC ID: 6749A-AP1020
Power: 48 VDC, 0.3 A
Connector type: Ethernet (PoE)
PoE tag: 802.3af, standard
CPU1: Broadcom BCM4748A1 (533 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Spansion S29GL128P90TFIR2)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Hynix H5PS5162FFR-Y5C × 2)
Expansion IFs: Mini PCIe, USB 2.0
Mini PCIe slots: 1
USB ports: 1
Serial: yes
WI1 chip1: Broadcom BCM4748A1
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 module: Broadcom BCM94342EMC
WI2 module IF: Mini PCIe
WI2 chip1: Broadcom BCM4342E
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL
ETH chip1: Broadcom BCM4748A1
ETH chip2: Broadcom BCM5481A2
LAN speed: 1G
LAN ports: 1
abgn
Additional chips
2.4/5GHz Front End Module;Skyworks;SE2548A;;2;
802dot11 OUI: none specified
| FCC ID | |
|---|---|
| Broadcom BCM94342EMC | RE7-AP1020 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Dual Radio Access Point AP1000
The FCC test report notes the manufacturer as USI [United Scientific Industrial (Shanghai)].
The FCC manual (installation guide) seems to indicate the AP1000 and AP300 SSIDs are Meru.
"MERU Mount Tam" and "DVT2.1" is silkscreened on the main board.
- CPU: Broadcom BCM4748 MIPS 74K WiSoC (2x2 802.11bgn)
- "200-117166-0010G A", the BRCM logo, "BCM94342EMC",
- and "LOG_M11" is silkscreened on the wireless module.
- Broadcom BCM94342EMC - BCM4342E (MAC/PHY/Radio)
- 802.11n 2 Stream Enterprise PCIe Module Full Mini Card
- Both radios are using two Skyworks (SiGe) SE2548A
- (Skyworks SE2548A Dual Band 802.11n FEMs)
