SuperMicro SYS-E100-8Q
SuperMicro SYS-E100 8Q-AW (Rev 1.00)
(Est.) release date: February 2015
Country of manuf.: USA
Type: IoT hub, IoT
FCC ID: none available
PCB ID: 548.00203.0031
Power: 5-12 VDC, 1-3 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9.5 mm (LEN)
CPU1: Intel Quark X1021 (400 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Winbond W25Q64FVSIG)
RAM1: 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (Winbond W632GG8KB-15 × 2)
Expansion IFs: Mini PCIe, USB 2.0
Mini PCIe slots: 2
USB ports: 2
JTAG: yes, 10-pin header, populated, J1
Serial: yes, console port (DE-9), (115200 8N1)
WI1 module: Intel Dual Band Wireless-AC 7260 (7260HMW)
WI1 module IF: Mini PCIe (half)
WI1 chip1: Intel W308AK1L
WI1 802dot11 protocols: abgn+ac
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL, RP-SMA
ETH chip1: Intel Quark X1021
ETH chip2: National Semiconductor DP83848
ETH chip3: National Semiconductor DP83848
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1
abgn+ac
Stock bootloader: Grub 0.97
Stock FW OS: Linux 3.4.91 Wind River Linux 5.0.1.25
Flags: Micro SD Card slot, TPM, RTC, UART, RS485, ADC, DIO, I2C, metal case
802dot11 OUI: none specified
Ethernet OUI: 0C:C4:7A
For a list of all currently documented Intel chipsets with specifications, see Intel.
For a list of all currently documented Intel Quark SoC's with specifications, see Intel Quark.
IoT Gateway System E100-8Q
Hardware specification
- CPU: Intel Quark X1021 @400MHz
- Single-Core x86 (32-bit)
- Memory: 512MB (DDR3) SDRAM
- Storage: 8MB (CMOS) Serial Flash,
- and Micro SD Card (up to 32GB)
- Network: 2x Fast Ethernet ports
- Wi-Fi: Intel 7260 (802.11abgn/ac)
- USB: 1x USB 2.0 (host), 1x USB 2.0 (device) ports
- Power: 5-12V, 1-3A via barrel
Images
Board Top
Board Bottom
