2Wire 2701HG-B
2Wire 2701 HG-B
FCC approval date: 05 October 2006
Country of manuf.: China
Type: wireless router, dsl modem, CPE
FCC ID: PGR2W2701
Power: 5.1 VDC, 2 A
Connector type: barrel (EIAJ-02)
Conn. measurements: 4.0 mm (OD), 1.7 mm (ID), 9.5 mm (LEN)
CPU1: 2Wire Ares
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (STMicroelectronics NAND128W3A28N6)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Samsung K4H561638J-LCCC)
Expansion IFs: none specified
WI1 chip1: Atheros AR2413A
WI1 802dot11 protocols: bg
WI1 antenna connector: none
ETH chip1: 2Wire Ares
Switch: Marvell 88E6061
LAN speed: 100M
LAN ports: 4
bg
Flags: ADSL2+
Default SSID: 2WIREXXX (5 addl. devices)
Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 158 additional devices
of which 5 are 2Wire devices
For a list of all currently documented 2Wire chipsets with specifications, see 2Wire.
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
This device is/was used with AT&T for their DSL service.
The default SSID is 2WIRE followed by the last three digits of the serial number.
- The default WEP key is printed on the unit under the serial number.
Forums threads
- 2Wire 2701HG-B - American AT&T - Atheros AR2413A (EEPROM 24C32WI)
- 2Wire 2701HG-W PCB (ADSL2+ CPE for British Telecom's Business Broadband)
- MPU: 2Wire Ares (Medusa), TriMedia VLIW (Very Long Instruction Word) core