4ipnet HSG200
4ipnet HSG200
Manuf (OEM/ODM): LanReady
FCC approval date: 23 September 2010
Country of manuf.: Taiwan
Type: access point
FCC ID: SCD020067
Power: 12 VDC, 1.5 A
Connector type: barrel
CPU1: Atheros AR7240
FLA1: ? MiB (Brand? Model?)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Hynix HY5DU121622DTP-D43)
Expansion IFs: USB 2.0
USB ports: 1
Serial: DE-9
WI1 chip1: Atheros AR9283
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL, RP-SMA
ETH chip1: Atheros AR7240
Switch: Atheros AR7240
LAN speed: 100M
LAN ports: 2
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: HSG200-1
, HSG200-2
Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 158 additional devices
of which 0 are 4ipnet devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 3 are 4ipnet devices
802dot11 OUI: none specified
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
Wireless Hotspot Gateway
Datasheet
"FN3A" and "REV:1.2" is silkscreened on the board in the FCC photos.
This is a LanReady OEM product.
The FCC test report lists additional models identified by this FCC ID. They are as follows..
- 3 Port
- Cenwell CHG-920X
- LanReady AC920X
- Wavecore WV-200HS
- TRENDnet TEW-656HG
- Pheenet WAS-105R
- Airlink101 AR700HSN
- Cerio WMR-200N
- 4ipnet HSG200
- Cipherium W1110
- LevelOne WHG-1000
- Kozumi K-500HPG
- Wiborne HSG-100
- USC W1110
- RayTalk RA-5n5
- Cenwell CAP-952X
- LanReady AP952X
- Wavecore WV-100IA
- Pheenet WAP-854NP
- Cerio WM-200N
- Kozumi K-520WPG
- Wiborne WAP-100
- 2 Port
- 4ipnet EAP200
- 4ipnet EAP206
- Cipherium A210
- Cipherium A216
- USC A210
- USC A216
- RayTalk RA-1000
- (not listed, redirects to LanReady FCC ID) OvisLink AirLive WIAS-3200N (FCC ID: ODMWIAS32N)
Per 4ipnet's manual...
- 192.168.1.254 IP for the Private subnet, no authentication required, admin:admin credentials
- 192.168.11.254 IP for the Public subnet, authentication required
- Default SSIDs of HSG200-1 (private, disabled by default, however?) and HSG200-2 (public)
- WiGLE shows a few HSG200-2 SSIDs - w/ 06:1F:D4 (4) or 06:11:6B (1) OUIs