APC WMR1000G
APC WMR1000G
Manuf (OEM/ODM): SerComm IP802SM
Type: travel router, access point, bridge
FCC ID: P27IP802SM
Power: 5 VDC, 2 A
Connector type: barrel
CPU1: Marvell 88W8510
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Brand? Model?)
RAM1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Brand? Model?)
Expansion IFs: none specified
WI1 chip1: Marvell 88W8510
WI1 chip2: Marvell Model?
WI1 802dot11 protocols: bg
WI1 antenna connector: none
ETH chip1: Marvell 88W8510
LAN speed: 100M
LAN ports: 1
bg
Flags: portable
Default SSID: APC_AP
, APC_Router
, default (99 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 0 are APC devices
Default login user: Admin
Default login password: APC
FCC ID | |
---|---|
3Com OfficeConnect 3CRTRV10075 (WL-534) | P27IP802SM |
Netgear WGR101 | PY3WGR101 P27IP802SM |
Netgear WGX102v1 | PY3WGX102 P27IP802SM |
SerComm IP802SM v1 | P27IP802SM |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
3-in-1 Wireless Mobile Router
This device has four differing modes...
- AP Mode
- The default SSID in this mode is APC_AP.
- AP/Router Mode
- The default SSID in this mode is APC_Router.
- The default IP in this mode is 192.168.1.1.
- Config Mode
- The default SSID in this mode is default.
- The default IP in this mode is 192.168.1.1.
- Client Mode
Included PSU(s)
Leader Electronics MU12-2050200-A1 (more) | |||||
---|---|---|---|---|---|
Input: 100-240 VAC ~ 50/60 Hz, 0.5 A | |||||
Input connector: NEMA 1-15P | |||||
Output: 5 VDC, 2 A | |||||
Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? |