ASUS GT-AC9600

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

ASUS GT-AC9600 A1 (REV 3.20)
Availability: now

Manuf (OEM/ODM): Askey

FCC approval date: 28 April 2017
Country of manuf.: China
Series: AC9600

Type: wireless router

FCC ID: MSQ-RTG03H
IC ID: 3568A-RTG03H

Power: 19 VDC, 3.42 A
Connector type: barrel

CPU1: Annapurna Labs Alpine AL5140 (1.7 GHz, 4 cores)
CPU2: Quantenna QT10GU (1.0 GHz, 2 cores)
FLA1: 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (Macronix MX30UF4G18AB-TI)
FLA2: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond Model?)
RAM1: 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (SK hynix H5TC4G63CFR-RDC × 2)
RAM2: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Winbond W631GG6KB-11 × 2)

Expansion IFs: USB 3.0, M.2 SSD slot, SFP+
USB ports: 2
SFP ports: 1
JTAG: yes, 20-pin header, J1
Serial: yes, 20-pin header, J1

WI1 chip1: Quantenna QT10GU
WI1 chip2: Quantenna QT6210B
WI1 802dot11 protocols: bgn
WI1 MIMO config: 4x4:4
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Quantenna QT10GU
WI2 chip2: Quantenna QT7810C
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 8x8:8
WI2 antenna connector: U.FL, RP-SMA

ETH chip1: Atheros AR8035-A
ETH chip2: Aquantia AQR107
Switch: Realtek RTL8370MB
LAN speed: 1GbE
LAN ports: 8
WAN speed: 10GbE
WAN ports: 2

abgn+ac

Additional chips
2.4GHz Power Amplifier IC;Richwave;RTC6649E;;4;
5GHz Front End Module;Qorvo;QPF4519;QPF, 4519, 58ZE;8;
PCIe to 2-port USB 3.1;ASMedia;ASM1142;asmedia, ASM1142, BVA56218A2, 1620;1;
RGB Lighting Control LED Driver;Aura;72UB0;AURA, 72UB0, N-5X1767-A, ACB160713;1;

Flags: Wave3, MU-MIMO, VHT160, DFS, Link Aggregation, 10GbE (10GBase-T), SFP+ (10GbE), SSD slot

Default SSID: ASUS_XX_2G (19 addl. devices)
, ASUS_XX_5G (18 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 167 are ASUS devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 198 are ASUS devices

802dot11 OUI: none specified

For a list of all currently documented Annapurna Labs SoC's with specifications, see Annapurna Labs.
For a list of all currently documented Quantenna chipsets with specifications, see Quantenna.


8600 Mbps max PHY rate for the 160MHz wide 5GHz channel,
1000 Mbps max. PHY rate for the 40MHz wide 2.4GHz channel = AC9600 class

AC9600 Wireless Dual Band Gigabit Gaming Router

ASUS ROG Rapture Aura 10G Gaming Router
Product page

"GT-AC9600 REV3.20" is silkscreened on the board in the FCC photos.

ASUS ROG Rapture GT-AC9600, ASUS RT-AC9600R
FCC ID: MSQ-RTG03H (04/28/2017) IC: 3568A-RTG03H, PSU: 19V/3.42A
CPU: Alpine AL5140 @1.7GHz (Quad Core), LAN: Aquantia AQR107/407
WLAN: Quantenna 802.11an/ac (5GHz 8T8R), 1x 802.11bgn (2.4GHz 4T4R)

The manufacturer stated in the FCC test report is Askey and Compal.

C2PC on 7/14/17 adds 160MHz BW and DFS..

Specification

Wave 3, 8x8 MU-MIMO 802.11ac {AC9600}
802.11n: 2.4GHz (40MHz) 4T4R 1Gbps
802.11ac: 5GHz (160MHz) 8T8R 8.6Gbps

Forum threads

- CPU: Alpine AL5140 @1.7GHz (Quad Core ARMv7 Cortex-A15)
- WLAN: Quantenna QSR10GU 802.11abgn/ac (2.4/5GHz)
- WAN: Aquantia AQR107 - 1x WAN + 1x LAN (10GbE ports)
- LAN: Realtek RTL8370MB switch - 8x LAN (1GbE ports)
- LED: RGB/Aura lighting
- SSD: M.2 SSD support

GPL Info

 • GPL info
export GT-AC9600 := IPV6SUPP=y HTTPS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y 
  MEDIASRV=n MODEM=y PARENTAL2=y ACCEL_PPTPD=y PRINTER=n USB="USB" GRO=y 
  AUTODICT=y LANWAN_LED=y BUILD_NAME="GT-AC9600" MDNS=y BECEEM=n ODMPID=y 
  OPENVPN=n VPNC=y SHP=y DUALWAN=y BWDPI=n DUMP_OOPS_MSG=y DEBUGFS=y SSH=y 
  REBOOT_SCHEDULE=y OPTIMIZE_XBOX=y FINDASUS=y STAINFO=y CAPTIVE_PORTAL=n \
  SAMBA3=y APP="installed" UBI=y EXT4FS=y
    PERMISSION_MANAGEMENT=y \
    WEBDAV=n SMARTSYNCBASE=n \
    NTFS="open" TFAT=n DISK_MONITOR=y \
    MTWANCFG=y \
    BOOT_FLASH_TYPE=NAND SWITCH_CHIP=RTL8370MB_PHY_QCA8033_X2 WANPORT2=y
    PWRSAVE=y \XHCI=y ATEUSB3_FORCE=y M2_SSD=y \
    BLINK_LED=n WANRED_LED=y PWRRED_LED=y FO_LED=y EJUSB_BTN=y \
    REPEATER=y PROXYSTA=n DISABLE_REPEATER_UI=n USER_LOW_RSSI=y UBIFS=y 
     REDIRECT_DNAME=y ATF=y QCA_TW_AUTO_BAND4=n PSISTLOG=y \
    TEMPROOTFS=y WPSMULTIBAND=y \
    EXTRA_KERNEL_CONFIGS="" \
    VLAN_TAGGED_BASE=n GETREALIP=y \
    QTN=n ALPINE=y SWITCH2="RTL8370MB" \
    NVRAM_FILE=y QSR10G=y AQR107=y IPERF=n RGBLED=y I2CTOOLS=y LED_BTN=y 
     BTN_WIFITOG=y

See also

FCC ID: MSQ-RTACHN00, IC ID: 3568A-RTAC86U, PSU: 19V/1.75A
CPU: Broadcom BCM4906, WLAN: BCM4366E (4T4R)/BCM4365E (3T3R)
10G/5G/2.5G/1G/100Mbps; RJ45 port and built-in QoS; Jumbo Frame