AboCom ARM914
AboCom ARM914
FCC approval date: 22 April 2004
Country of manuf.: Taiwan
Type: wireless router
FCC ID: MQ4ARM914
Power: 12 VDC, 0.8 A
Connector type: barrel
CPU1: Marvell 88W8510
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Fujitsu 29LV800TE-90PFTN)
RAM1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Winbond W981616BH-6 × 2)
Expansion IFs: none specified
WI1 chip1: Marvell 88W8510
WI1 chip2: Marvell Model?
WI1 802dot11 protocols: bg
WI1 antenna connector: RP-SMA
ETH chip1: Marvell 88W8510
Switch: Marvell 88E6060
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bg
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 1 are AboCom devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1327 additional devices
of which 6 are AboCom devices
802dot11 OUI: none specified
| FCC ID | |
|---|---|
| Airlink+ AR315W | MQ4ARM914 |
| Hawking HWR54G rev M | MQ4ARM914 |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
"M01-914M+-A10" is silkscreened on the board.
This board is highly homologous to the HotBrick SoHo 401W / SerComm IP806SM. This may be indicative of usage of the same Marvell reference design or evidence of SerComm involvement in the design (likely).
- According to djb, the board was designed by SerComm. The firmware for the ARM914 corroborates this as the firmware contains strings indicating SerComm authorship. The manual follows the typical SerComm format.
Images (from a HWR54G rev M)
- external
angled
bottom
back
power adapter
- internal
board top
board bottom
