Acme Systems Fox Board G20
Acme Systems Fox Board G20 V1
Availability: Long Term Availability
Country of manuf.: Italy
Type: single-board computer
Power: 5 VDC, 1 A
Connector type: barrel
Conn. measurements: 4.0 mm (OD), 1.7 mm (ID), 0.9 mm (LEN)
CPU1: Atmel AT91SAM9G20 (400 MHz)
FLA1: 256 KiB 0.25 MiB <br />262,144 B <br />2,048 Kib <br />2 Mib <br />2.441406e-4 GiB <br /> (Atmel AT45DB021D)
RAM1: ? MiB (Brand? Model?)
RAM2: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Samsung K4M51323PI-HG75)
Expansion IFs: USB 2.0
USB ports: 3
Serial: yes, 6-pin header, populated, 3.3V TTL, (115200 8N1)
ETH chip1: Atmel AT91SAM9G20
ETH chip2: Davicom DM9161AEP
LAN speed: 100M
LAN ports: 1
Additional chips
Programmable Dual High-Current Step-Down DC/DC and Dual Linear Regulator;TI;LM26480;;1;
4 Pin Push-Pull Voltage Supervisor w/Manual Reset;ON Semi;CAT811;;1;
Stock bootloader: AcmeBoot 1.22
Stock FW OS: Linux 4.19.209 Debian 10
Flags: Micro SD Card slot, RTC w/ battery, UART, GPIO, I2C, SPI
Default IP address: acquired via DHCP
the IP acquired via DHCP is used by 212 additional devices
of which 0 are Acme Systems devices
Default login user: acme
Default login password: acmesystems
Ethernet OUI: 00:04:25
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
FOX Board G20
Device is the Acme Systems Netus G20 SoM mounted
- on a carrier board.
Hardware specification
- CPU: Atmel AT91SAM9G20
- @400MHz (ARM926EJ-S)
- Memory: 64MB (SDRAM) SDR
- Storage: 256KB SPI NOR Flash,
- TF card (max.32GB)/MMC card
- Network: 1x Fast Ethernet port
- USB: 2x USB 2.0 Host, 1x Micro USB Device
- Power Source: 5V 1A via barrel or Berg Connector
Images
SoM Top
SoM Bottom
Carrier Board Top
Carrier Board Bottom
Fox Board Top
