Actiontec GT704WG
Actiontec GT704WG
FCC approval date: 15 March 2004
Country of manuf.: China
Type: wireless router, dsl modem
FCC ID: LNQGT704
US: LNQDL00BGT704
Power: 12 VDC, 0.6 A
Connector type: barrel
Conn. measurements: 3.5 mm (OD), 1 mm (ID), 9.5 mm (LEN)
CPU1: Texas Instruments TNETD7300 (150 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX29LV320ABTC-90)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (ICSI IC42S16800-7T)
Expansion IFs: none specified
JTAG: yes
Serial: yes, 3.3V TTL, 6-pin header, populated, (38400,8,N,1)
WI1 chip1: Texas Instruments TNETW1130
WI1 chip2: Radia RC2422B
WI1 chip3: Radia RC2326
WI1 802dot11 protocols: bg
WI1 antenna connector: RP-SMA
ETH chip1: Texas Instruments TNETD7300
Switch: Marvell 88E6060
LAN speed: 100M
LAN ports: 4
bg
Additional chips
Serial EEPROM (8 Kbit);Atmel;AT24C08AN;;1;
Stock bootloader: ADAM2 0.22.02
Stock FW OS: Linux 2.4.17 MontaVista
Flags: ADSL2+, schematics
Default SSID: XXXXX (9 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 15 are Actiontec devices
Default login user: admin
Default login password: password
admin:password credentials used by 423 additional devices
of which 1 are Actiontec devices
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
Actiontec GT704WG | Texas Instruments | Texas Instruments | Radia |
Actiontec GT704WGB | Broadcom | Broadcom | |
Actiontec GT704WGRV | Texas Instruments | Texas Instruments | Texas Instruments |
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
54 Mbps Wireless DSL Gateway with 4-Port Router
The SSID follows a pattern of 5 letters and numbers (example: EJB67).
- Per the label, the WEP key appears to be last 5 octets of the unit
- MAC address (which may be the WLAN MAC minus 3 hex digits).
The included power supply is a Actiontec AD-1260 (12V DC, 0.6A).
- ID/OD/Len measurements are not exact.