Actiontec MI424WR rev A

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Actiontec MI424WR A

(Est.) release date: July 2006
Country of manuf.: China

Type: wireless router, FiOS modem

FCC ID: LNQ802MRG

Power: 5 VDC, 3 A
Connector type: barrel

CPU1: Intel XScale IXP425 (533 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Intel JS28F640J3D-75)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Hynix HY57V281620ETP-H × 2)

Expansion IFs: Mini PCI
Mini PCI slots: 1
Serial: yes, 3.3V TTL

WI1 module: Actiontec 802MRG
WI1 module IF: Mini PCI
WI1 chip1: Ralink RT2560
WI1 chip2: Ralink RT2525
WI1 802dot11 protocols: bg
WI1 antenna connector: RP-SMA

ETH chip1: Intel XScale IXP425
ETH chip2: Micrel KSZ8721BL
Switch: Micrel KSZ8995MA
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bg

Stock FW OS: Linux 2.4.21 Jungo OpenRG

TPFirmware supported: OpenWrt, DD-WRT • (List), LEDE Project (OpenWrt)

Default SSID: XXXXX (9 addl. devices)
, AP2500-A1
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1209 additional devices
of which 7 are Actiontec devices

802dot11 OUI: 00:18:01 (3 E, 3 W)
Ethernet OUI: 00:0F:B3 (3 E, 3 W)

For a list of all currently documented Intel chipsets with specifications, see Intel.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.


GPL Code download center
On the OpenWrt wiki
Actiontec MI424WR can it be supported? - DD-WRT forums
MI424WR on the DD-WRT wiki

Actiontec MI424WR - a cheap MoCA bridge for all! - AVS Forum

Actiontec MI424WR Review: Able partner for Verizon FiOS - SmallNetBuilder

00:15:05 potential OUI

Actiontec MI424WR A on TechInfoDepot

The device presumably uses two Entropic Communications EN2010 for the coaxial (MoCA) connections.

Switch / PHY P/Ns may vary, older models will likely have Kendin branded chips (see the SmallNetBuilder image) whereas newer devices will probably have Micrel branded chips

The default SSID follows a pattern of 5 letters and numbers (example: 07NJ8). The AP may take on an SSID of AP2500-A1 for a short period of time while booting or resetting to factory defaults.

Images

External

Internal