Actiontec R3010UW

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Actiontec R3010UW

FCC approval date: 14 January 2002

Type: access point

FCC ID: LNQR3010UW

Power: ? VDC, ? A
Connector type: barrel

CPU1: Virata Helium 210-80
FLA1: ? MiB (Brand? Model?)
RAM1: ? MiB (Brand? Model?)

Expansion IFs: PCMCIA (16-bit), USB 1.1 (slave)
PCMCIA slots: 2

WI1 module: unknown
WI1 module IF: PCMCIA (16-bit)
WI1 chip1: Intersil Model?
WI1 chip2: Intersil ISL3685
WI1 802dot11 protocols: b
WI1 antenna connector: none

ETH chip1: Virata Helium 210-80
ETH chip2: Realtek RTL8019AS
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1

b

Flags: schematics

Default SSID: ACTIONTEC (4 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 15 are Actiontec devices

802dot11 OUI: none specified

For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented GlobespanVirata chipsets with specifications, see GlobespanVirata.


Wireless Cable/DSL Router
Product page
Manual

The Actiontec P/N for this device is probably GE344000-01.

This FCC ID covers two devices...

  • R3010UW (Wireless Cable/DSL Router), filed 01/14/2002
    • 1x LAN, 1x WAN, internal PCMCIA for wireless module, external PCMCIA
    • RENO_JR
  • R3010UW(AP) (802.11b Access Point), via C2PC filed 05/23/2002
    • 1x LAN, internal PCMCIA for wireless module
    • APTOS

10/100 LAN (w/ integrated SoC MAC+PHY) and 10Mbit WAN (RTL8019AS)

The schematics are for the R3010SUW (RENO).

Per the manual, the default SSID is ACTIONTEC.

The schematics indicate the device uses RTL8019AS (10Mbit Ethernet controller).