Aerohive HiveAP 170

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Aerohive HiveAP 170 (AH-AP-170-N-FCC)
Availability: now

Manuf (OEM/ODM): Senao

FCC approval date: 20 September 2011
UPC: 700580841832 (UPC DB, On eBay)
Country of manuf.: Taiwan

Amazon image

ASIN
B071HHFRDR (Flag of the United States.svg, On Amazon, On CCC)

Type: managed access point

Power: 48 VDC, 0.6 A
Connector type: Ethernet (PoE)
PoE tag: 802.3at, standard

CPU1: Atheros AR7161 (680 MHz)
FLA1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (STMicroelectronics M25P128-VMF6PB × 4)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Nanya NT5DS32M16DS-5TI × 2)

Expansion IFs: Mini PCI
Mini PCI slots: 2
Serial: yes, internal, 4-pin header, J2, (9600,8,N,1)

WI1 module: EnGenius EMP5605H
WI1 module IF: Mini PCI
WI1 chip1: Atheros AR9220
WI1 802dot11 protocols: an
WI1 MIMO config: 2x2:2
WI1 antenna connector: MMCX, N-Female
WI2 module: EnGenius EMP9605H
WI2 module IF: Mini PCI
WI2 chip1: Atheros AR9220
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: MMCX, N-Female

ETH chip1: Atheros AR7161
ETH chip2: Marvell MV88E1118
LAN speed: 1G
LAN ports: 1

abgn

Additional chips
Trusted Platform Module;Atmel;AT97SC3204T;;1;

Flags: outdoor

Default login user: admin
Default login password: aerohive
admin:aerohive credentials used by 13 additional devices
of which 13 are Aerohive devices

802dot11 OUI: 88:DC:96 (22 E, 21 W)
Ethernet OUI: F0:9C:E9 (1 E, 1 W)

 FCC ID
EnGenius EMP5605HU2M-MP5605H
WBV-HIVEAP170
EnGenius EMP9605HU2M-MP9605H
WBV-HIVEAP170

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.


Outdoor 300Mbps Wireless Access Point

Datasheet

"HiveAP170-0.20 LFP" is silkscreened on the main board in the FCC photos.

A typical Senao P/N sticker is also attached to a RAM chip.

On a production model, the "HiveAP170" silkscreen mentioned above is absent and,

instead, the board is branded, "7016A05140 v1.10" above screw hole MH3.

There is an unpopulated header, J1, that is presumably JTAG.

Switch SW3 is a reset switch.

Wi-Fi Certified : WFA12615 (as of 08/26/2011)