Airespace 1250 (AS-1250-ABG-EXT)
Airespace 1250 (AS-1250-ABG-EXT)
Manuf (OEM/ODM): Wistron NeWeb
FCC approval date: 20 June 2004
Country of manuf.: Taiwan
Type: access point
FCC ID: QTZ1200W
IC ID: 4518A-1200W
Power: 48 VDC, 0.25 A
Connector type: barrel
PoE tag: 802.3af, standard
CPU1: Atheros AR5312A
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (AMD Am29LV320DB-90EI)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Micron MT48LC4M32B2)
Expansion IFs: none specified
Serial: yes, internal, unpopulated, (9600,8,N,1), RS-232
WI1 chip1: Atheros AR5312A
WI1 chip2: Atheros AR2112A
WI1 802dot11 protocols: bg
WI1 antenna connector: U.FL, RP-TNC
WI2 chip1: Atheros AR5312A
WI2 chip2: Atheros AR5112A
WI2 802dot11 protocols: a
WI2 antenna connector: U.FL, RP-TNC
ETH chip1: Atheros AR5312A
ETH chip2: IC+ IP101
LAN speed: 100M
LAN ports: 1
abg
Additional chips
4.5 to 6GHz Power Amplifier IC;Microsemi;LX5506;MSC, 5506, 432AT;1;InGaP/GaAs HBT;16-pin MLPQ;
2.4GHz Power Amplifier IC;Microsemi;LX5510;MSC, 5510, 432AH;1;InGaP/GaAs HBT;16-pin MLPQ;3 mm x 3 mm;
Stock FW OS: VxWorks 5.4.2 AireOS
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
AIReSpace Remote Edge Access Point
- "CAS01S0B" and "S/N: 81-100850-00[ ]" is silkscreened on the board in the FCC photos.
- "CAS01.00A" and "S/N: 81-100850-00[ ]" is silkscreened the back of a production board.
- "AP : 20-100850-000 REV1" is silkscreened on the top.
- Wistron NeWeb is the presumed manufacturer.
Serial
Pinout
It's accessible via the unpopulated console port on the board.
- Use a regular RS-232 adapter.
( ) ( ) (TxD) ( ) [ ] (RxD) (GND) ( ) CN8
.. may be the correct pinout
Info derived from
• boot log |
---|
ar531x rev 0x00005742 firmware startup... SDRAM TEST...PASSED enet0 mac address [00:0b:85:1b:c7:40] Please check the ethernet cable on port 0 VxWorks System Boot Copyright 1984-2001 Wind River Systems, Inc. CPU: AS 1250 Version: VxWorks5.4.2 BSP version: 1.0 Creation date: Sep 10 2004, 14:33:38 Airespace sw version 2.1.78.0 Press any key to stop auto-boot... 0 auto-booting... Attaching to TFFS... done. Loading /fl/vxWorks...18888 + 1567456 + 105600 Starting at 0x80480000... /fl/ - Volume is OK Using factory default settings. enet0 mac address [00:0b:85:1b:c7:40] enet0: Phy Status=7849 Please check the ethernet cable on port 0! ae0 loaded Base address = b8000000, irq 34, idx = 0, devno = 0 Attach AR5212 0x13 0x80e88740 wlan0 revisions: mac 5.7 phy 4.2 analog 3.6 eeprom 4.8 ar0 loaded Base address = b8500000, irq 37, idx = 1, devno = 1 Attach AR5212 0x13 0x80d16630 wlan1 revisions: mac 5.7 phy 4.2 analog 4.6 eeprom 4.8 bsnGet11gStatus: slot = 1, 11gSupport = 1 setting wireless modes to 11G for slot 1 ar1 loaded apInit: Initialize Access Point. wlan0 added STA: 00:0b:85:1b:c7:40 (7980) wlan1 added STA: 00:0b:85:1b:c7:40 (7996) Attached TCP/IP interface to ae unit 0 Attaching interface lo0...done Invalid device "tffs:0" Adding 9805 symbols for standalone. Initialized system logging. Ready 0x80fffcf0 (tRootTask): Can't attach unknown device mirror (unit 0). enet0 mac address [00:0b:85:1b:c7:40] enet0 mac address [00:0b:85:1b:c7:40] spamInitCfgData: Loaded configuration into v0 struct (version 4.2.209.0) spamInitCfgData: Loaded configuration into v2 struct (version 4.2.209.0) spamInitCfgData: Configuration file version = 4.2.209.0 spamInitCfgData: Configuration file size = 4096 certHeader = 0x80981c18 certHeader = 0x8098202a |