Alcatel-Lucent RG200E-CA (China Telecom)

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Alcatel-Lucent RG200E -CA (China Telecom)
Availability: only China

Manuf (OEM/ODM): SGE GRWNV5.IT111C -B1

Country of manuf.: China

Type: wireless router, analog phone gateway

Power: 12 VDC, 1.25 A
Connector type: barrel

CPU1: Broadcom BCM5358UB0 (530 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX25L12845EMI-10G)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Mira P3R12E4JFF-G8E)

Expansion IFs: USB 2.0
USB ports: 1

WI1 chip1: Broadcom BCM5358UB0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none

ETH chip1: Broadcom BCM5358UB0
Switch: Broadcom BCM5358UB0
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bgn

Default SSID: ChinaNet-XXXX (1 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 1 are Alcatel-Lucent devices

802dot11 OUI: 18:80:F5
Ethernet OUI: 18:80:F5

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.


Residential Gateway 200E-CA

"GRWNV5.IT111C-B1" and "REV1.0" is silkscreened on the board.
ChinaNet-XXXX SSID, 18:80:F5 OUI (Alcatel-Lucent Shanghai Bell Co., Ltd)
pre-defined: WPA/WPA2 key, login password, login name useradmin ?
The device has a RJ11 jack for VoIP.
Sources seem to indicate the device uses BCM5358 (BCM5358UB0)

Per this forum post containing the CFE boot log, CPU type 0x19749: 530MHz

this matches with Netgear WNDR3400v2's log, which uses a BCM5358UB0