Amped Wireless R10000
Amped Wireless R10000
Manuf (OEM/ODM): Loopcomm
Type: wireless router
FCC ID: ZTT-R10000
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Realtek RTL8196C
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Brand? Model?)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Brand? Model?)
Expansion IFs: none specified
WI1 chip1: Realtek RTL8192CE
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: RP-SMA
ETH chip1: Realtek RTL8196C
Switch: Realtek RTL8196C
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Flags: high power
Default SSID: Amped_Network
Default IP address: 192.168.3.1
the IP 192.168.3.1 is used by 31 additional devices
of which 17 are Amped Wireless devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 7 are Amped Wireless devices
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
High Power Wireless-N 600mW Smart Router
Product page
Mentioned on SmallNetBuilder's review of the R10000G as having 32MB RAM, assumed 4MB Flash
"LO00033 RE:V2.2" is silkscreened on the board in the FCC photos. This is a Loopcomm device.
The default SSID, according to the FCC label, is Amped_Network. The default PSK should be wireless. Per WiGLE, the OUI is probably F8:7B:8C.