Amped Wireless SR20000G
Amped Wireless SR20000G
Manuf (OEM/ODM): Loopcomm
Type: extender, repeater
FCC ID: ZTT-SR20000G
IC ID: 10233A-SR20000G
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Realtek RTL8198 (620 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX25L6445EM2I-10G)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Hynix H5PS5162GFR-S6C)
Expansion IFs: USB 2.0
USB ports: 1
WI1 chip1: Realtek RTL8192DR
WI1 802dot11 protocols: an
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Realtek RTL8192CE
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: none
ETH chip1: Realtek RTL8198
Switch: Realtek RTL8198
LAN speed: 1G
LAN ports: 5
abgn
Default SSID: Amped_Rep_2.4GHz
, Amped_Rep_5.0GHz
Default IP address: 192.168.1.240
the IP 192.168.1.240 is used by 21 additional devices
of which 11 are Amped Wireless devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1327 additional devices
of which 7 are Amped Wireless devices
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
High Power Wireless-N 600mW Gigabit Dual Band Repeater
Product page
This device shares the same hardware as the Amped Wireless R20000G.
The OEM of this device is Loopcomm. Probable F8:7B:8C OUIs
The device uses 2x SiGe SE5004L power amplifiers for the 5GHz radio and 2x SiGe SE2576L power amplifiers for the 2.4GHz radio.
Amped Wireless Extender Does Both Bands At Once - SmallNetBuilder
mhzkid's antenna kit listing for this device on eBay (w/ internal photos)
- 5GHz Radio: RTL8192DR
- 2.4GHz Radio: RTL8192CE
- "LOO0070 REV:1.3" is silkscreened on the board.
- Flash chip appears to be a 8MB Macronix MX25L6445EM2I-10G (or similar)
- RAM chip appears to be a 64MB Hynix H5PS5162GFR-S6C
Per the FCC label, the default SSIDs are Amped_Rep_2.4GHz and Amped_Rep_5.0GHz. The default WPA PSK is wireless.
