Aztech WL580E

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Aztech WL580E

FCC approval date: 21 February 2014
Country of manuf.: China

Type: repeater


Power: 100-240 VAC ~ 50-60 Hz, 0.12 A
Connector type: NEMA 1-15P

CPU1: MediaTek MT7620A
FLA1: ? MiB (Brand? Model?)
RAM1: ? MiB (Brand? Model?)

Expansion IFs: Mini PCIe
Mini PCIe slots: 1

WI1 chip1: MediaTek MT7620A
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 module: unknown
WI2 module IF: Mini PCIe
WI2 chip1: Ralink RT5592EP
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL

ETH chip1: MediaTek MT7620A
LAN speed: 100M
LAN ports: 1


Additional chips
5GHz Power Amplifier IC;Skyworks;SE5003L;SiGe, 5003L, 319EJ;2;

Default SSID: Aztech580_XXXX
, Aztech580(5G)_XXXX
Default IP address:
the IP is used by 4 additional devices
of which 2 are Aztech devices

802dot11 OUI: none specified

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.

Dual Band Wall Plugged 300Mbps Wireless Repeater

"250-616100-402" is silkscreened on the main board in the FCC photos.

"250-616000-402" is silkscreened on the RT5592EP wireless module.

Default settings are per the FCC sample label. They may be inaccurate.

The FCC manual shows the sample SSID patterns as Singtel7002-XXXX and Singtel7002(5G)-XXXX. It may be used with Singapore Telecommunications' service.
Presumed upper case hex digits for the trailing 4 characters, possibly last 2 octets of the BSSID