BandLuxe R528
BandLuxe R528
Manuf (OEM/ODM): Gemtek WVRTR-124GN
FCC approval date: 19 April 2012
Type: wireless router, analog phone gateway
FCC ID: UZI-R528
Power: 12 VDC, 2 A
Connector type: barrel
CPU1: Ralink Model?
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Eon EN25Q128-104FIP)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Hynix H5PS1G63EFR-S6C)
Expansion IFs: Mini PCIe (USB only)
Mini PCIe slots: 1
WI1 chip1: Ralink Model?
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Ralink Model?
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1
bgn
Flags: 4G, CDMA
Default SSID: LTE_ROUTER
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Embedded LTE WiFi VoIP Router, Home Gateway
R500 overview on BandRich's site
This device uses a Ralink RT??52 SoC.
"HW00741015 WVRTR-124GN_V01" and "ESX-X04-0701 RoHS" is silkscreened on the board in the FCC photos.
The Mini PCIe (USB) slot is occupied by a mobile broadband modem using the Qualcomm MDM9600 (Gobi) chip.
There is a label on the bottom of the board (in the FCC photos) with a MAC starting with 00:26:FA (BandRich).
The FCC router manual's sample SSID is LTE_ROUTER, which does seem to be used by (a very small number of) some BandRich (OUI 00:26:FA) devices. This is presumed to be the SSID (and OUI) for the device. The default IP may be 192.168.1.1, but the manual does not list the default credentials (Please refer to the Quick Start Guide included in the package.).
