Belkin BoB (F1PI243EGau, iinet)
Belkin BoB (F1PI243EGau, iinet, ver. 1000au)
Availability: Australia only
Manuf (OEM/ODM): Ayecom
(Est.) release date: 11 August 2009
Country of manuf.: China
Type: wireless router, dsl modem
Power: 12 VDC, 1.5 A
Connector type: barrel
CPU1: Broadcom BCM6358 (300 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix Model?)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Mira Model?)
Expansion IFs: none specified
WI1 802dot11 protocols: bgn
WI1 MIMO config: ?x?:?
WI1 antenna connector: U.FL
ETH chip1: Broadcom BCM6358
Switch: Realtek RTL8306G
LAN speed: 100M
LAN ports: 4
bgn
Flags: ADSL2+, DECT
Default SSID: WLAN (16 addl. devices)
Default IP address: 10.1.1.1
the IP 10.1.1.1 is used by 1 additional devices
of which 0 are Belkin devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 295 additional devices
of which 0 are Belkin devices
802dot11 OUI: 00:22:75 (13 E, 21 W), 94:44:52 (17 E, 22 W)
Ethernet OUI: 00:22:75 (13 E, 21 W), 94:44:52 (17 E, 22 W)
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
ADSL2+ 11n DECT IAD
Product page
Support page
Belkin BoB on LaPastenague wiki
- "A610A354054R_R3" is silkscreened on the board. This is a presumed Ayecom P/N.
Per the manual, the default SSID is WLAN (probably w/ a secondary SSID of WLAN2, but it does not appear to be enabled by default).