Belkin F5D6130 v1
Belkin F5D6130 v1
Manuf (OEM/ODM): Eumitcom WA3001A
FCC approval date: 08 November 2001
Country of manuf.: Taiwan
Type: access point
FCC ID: K7SF5D6130, LLM0102WA3001A
Power: 9 VDC, 1 A
Connector type: barrel
CPU1: Atmel AT76C510
FLA1: ? MiB (Brand? Model?)
RAM1: ? MiB (Brand? Model?)
Expansion IFs: none specified
WI1 chip1: Atmel AT76C510
WI1 chip2: Intersil Model?
WI1 chip3: Intersil Model?
WI1 802dot11 protocols: b
WI1 antenna connector: none
ETH chip1: Atmel AT76C510
ETH chip2: LSI Model?
LAN speed: 10M
LAN ports: 1
b
Default SSID: WLAN (16 addl. devices)
Default IP address: 192.168.0.254
the IP 192.168.0.254 is used by 49 additional devices
of which 0 are Belkin devices
| FCC ID | |
|---|---|
| Digital Path G1CPE150 | LLM0102WA3001A RHK-G1CPE150 |
| Eumitcom WA3001A | LLM0102WA3001A |
| SMC SMC2655W v1 | LLM0102WA3001A |
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Belkin F5D6130 v1 | Atmel | Atmel | Intersil |
| Belkin F5D6130 v2 | ADMtek | ADMtek | RFMD |
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
802.11b Wireless Network Access Point
• Support page
"WA3001A Rev:T3.0" is silkscreened on the main board in the FCC photos.
- "Eumitcom Technology Inc." and "WL11000RFM Rev: T3.0" is silkscreened on the RF module.
There is no HTTP configuration interface for this device. You will be required to use Eumitcom's Access Point manager software.
Images
