Belkin F5D6231-4 v2

Belkin F5D6231-4 v2

Manuf (OEM/ODM): Accton

FCC approval date: 05 June 2003
Country of manuf.: Taiwan

Type: wireless router

FCC ID: K7SF5D623142
IC ID: 3623A-F5D623V2

Power: 9 VDC, 1 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9 mm (LEN)

CPU1: ADMtek ADM8628 (75 MHz)
FLA1: 2 MiB2,097,152 B 16,384 Kib 2,048 KiB 16 Mib 0.00195 GiB  (SST SST39VF016-70-4C-EI)
RAM1: 8 MiB8,388,608 B 65,536 Kib 8,192 KiB 64 Mib 0.00781 GiB  (Winbond W986432DH-6)

Expansion IFs: none specified

WI1 chip1: ADMtek ADM8628
WI1 chip2: RFMD RF3000
WI1 chip3: RFMD RF2958
WI1 802dot11 protocols: b
WI1 antenna connector: none

ETH chip1: ADMtek ADM8628
Switch: ADMtek ADM6996
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

b

Default SSID: WLAN (16 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 295 additional devices
of which 97 are Belkin devices

802dot11 OUI: 00:30:BD (5 E, 13 W)
Ethernet OUI: 00:30:BD (5 E, 13 W)

	CPU1 brand	WI1 chip1 brand	WI1 chip2 brand
Belkin F5D6231-4 v1	Conexant	Atmel	RFMD
Belkin F5D6231-4 v2	ADMtek	ADMtek	RFMD

For a list of all currently documented ADMtek chipsets with specifications, see ADMtek.

802.11b Wireless Cable/DSL Gateway Router
• Support page

This device is quite similar to the Accton WG3005D, and is presumably a sub-model of the device. I did, however, not take a photo of the Accton model sticker during the time I had access to a unit.

A user editing this page indicated that his unit had a bad capacitor (particularly the big Nichicon 6.3V 1500μF).