Belkin F5D8230-4 v3

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Belkin F5D8230-4 v3000

Manuf (OEM/ODM): Gemtek WRTO-127G

(Est.) release date: May 2006
Country of manuf.: Taiwan

Type: wireless router

Power: 12 VDC, 1 A
Connector type: barrel
Conn. measurements: 5 mm (OD), 2 mm (ID), 10 mm (LEN)

CPU1: Realtek RTL8651B
FLA1: 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX29LV320CBTC-90G)
RAM1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (EtronTech EM639165TS-6G)

Expansion IFs: Mini PCI
Mini PCI slots: 1

WI1 module: Airgo AGN1223AR-03
WI1 module IF: Mini PCI (long)
WI1 chip1: Airgo AGN103BB
WI1 chip2: Airgo AGN100RF
WI1 chip3: Airgo AGN100RF
WI1 802dot11 protocols: bg
WI1 MIMO config: 2x3:2
WI1 antenna connector: U.FL

ETH chip1: Realtek RTL8651B
Switch: Realtek RTL8651B
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bg

Default SSID: Belkin_Pre-N_XXXXXX (2 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 295 additional devices
of which 97 are Belkin devices

802dot11 OUI: 00:11:50 (20 E, 39 W)
Ethernet OUI: 00:11:50 (20 E, 39 W)

 FCC ID
Belkin F5D8230-4 v1SA3-AGN0901AP0100
SA3-AGN1223AR0300
Belkin F5D8230-4 v2SA3-AGN0901AP0100
SA3-AGN1223AR0300
Belkin F5D9230-4 v1SA3-AGN0901AP0100
 FCC ID
Airgo AGN1223AR-03SA3-AGN1223AR0300
Belkin F5D8230-4 v1SA3-AGN0901AP0100
SA3-AGN1223AR0300
Belkin F5D8230-4 v2SA3-AGN0901AP0100
SA3-AGN1223AR0300
Belkin F5D8630-4K7SF5D8630-4
SA3-AGN1223AR0300
Buffalo WZR-G108FDI-09101462-0
SA3-AGN1223AR0300
Linksys WMP54GXQ87-WMP54GX
SA3-AGN1223AR0300
Linksys WRT54GX v1Q87-WRT54GX
SA3-AGN1223AR0300
Linksys WRT54GX v2Q87-WRT54GX
SA3-AGN1223AR0300
Netgear WGM124SA3-AGN1223AR0300
Planex BRC-W108GSA3-AGN1223AR0300

For a list of all currently documented Airgo chipsets with specifications, see Airgo.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.


OEM Gemtek WRTO-127G (WRTO-127G_V03)

"190-D03-6900R RoHS" is silkscreened on the board.

The device has been tagged with the AGN100 wireless module FCC ID.. but the only FCC ID printed on the unit is SA3-AGN0901AP0100. SA3-AGN0901AP0100 defines the board used in the Belkin F5D8230-4 v1 which is not used in the v3.. so the FCC ID printed on the label is incorrect.

The RF shields are attached to the main board with a combination of blue clips and adhesive tape. The Airgo wireless module is soldered onto the Mini PCI retaining clips.

The default SSID is Belkin_Pre-N_XXXXXX where XXXXXX appears to be the last three octets of the wireless interface MAC address (lower case letters).

Images