Belkin F5D8232-4 v2
Belkin F5D8232-4 v2
Manuf (OEM/ODM): SerComm
FCC approval date: 25 June 2008
Country of manuf.: China
Type: wireless router
FCC ID: K7SF5D8232-4V2
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Ralink RT2880
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX29LV320CBTC-70G)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (EtronTech EM639165TS-6G × 2)
Expansion IFs: none specified
WI1 chip1: Ralink RT2880
WI1 chip2: Ralink RT2820
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x3:2
WI1 antenna connector: U.FL
ETH chip1: Ralink RT2880
Switch: Realtek RTL8366SR
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
bgn
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 295 additional devices
of which 97 are Belkin devices
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Belkin F5D8232-4 v1 | Atheros | Atheros | Atheros |
| Belkin F5D8232-4 v2 | Ralink | Ralink | Ralink |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
N1 Vision Wireless Router
• Support page
Product page
"YKM00D-1.6" is silkscreened on the board in the FCC photos.
Post purporting a supported firmware image on the DD-WRT forums
The default SSID pattern may be Belkin_N1_Wireless_XXXXXX or Belkin_N1_XXXXXX (where XXXXXX is the last three octets of the wireless interface MAC [upper case hex characters]).
