Belkin F6D4230-4 v1
Belkin F6D4230-4 v1
Manuf (OEM/ODM): SerComm IP1006SR
FCC approval date: 06 January 2009
Country of manuf.: China
Type: wireless router
FCC ID: K7SF6D4230V1
IC ID: 3623A-F6D4230V1
Power: 12 VDC, 1 A
Connector type: barrel
Conn. measurements: 5.3 mm (OD), 3 mm (ID), 9.5 mm (LEN)
CPU1: Ralink RT3050
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Brand? Model?)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Brand? Model?)
Expansion IFs: none specified
WI1 chip1: Ralink RT3050
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Ralink RT3050
Switch: Ralink RT3050
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: Belkin_XXXXXX (1 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 295 additional devices
of which 97 are Belkin devices
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Belkin F6D4230-4 v1 | Ralink | Ralink | |
| Belkin F6D4230-4 v2 | Ralink | Ralink | |
| Belkin F6D4230-4 v3 | Broadcom | Broadcom |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
N150 Enhanced Wireless Router
• Support page
Device is a SerComm IP1006SR (YPK00A-1.0)
The default SSID appears to be Belkin_XXXXXX where XXXXXX is the last three octets of the wireless interface MAC (lower case letters).
The power adapter included with the device is a Leader Electronics M12-Y1120-A64S (12V, 1A). ID/OD/Len measurements are approximate.
