Belkin F7D1301
Belkin F7D1301 v1
Manuf (OEM/ODM): Arcadyan
Type: wireless router
FCC ID: K7SF7D1301V1
IC ID: 3623A-F7D1301V1
Power: 9 VDC, 1 A
Connector type: barrel
Conn. measurements: 5 mm (OD), 3 mm (ID), 10 mm (LEN)
CPU1: Broadcom BCM5356A1 (300 MHz)
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Winbond W25Q16BV)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Winbond W9864G6IH-6)
Expansion IFs: none specified
WI1 chip1: Broadcom BCM5356A1
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Broadcom BCM5356A1
Switch: Broadcom BCM5356A1
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: Belkin.XXXX (6 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 294 additional devices
of which 97 are Belkin devices
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Basic Wireless Router
- Belkin F7D1301 v1 on DD-WRT forums (PCB image)
Per the DD-WRT known incompatible devices table, the device has 2MB Flash.
The power adapter included with the device is a Leader Electronics
- MT12-Y090100-A1 (9V, 1A). ID/OD/Len measurements are approximate.
See also Belkin F6D4230-4 v3..
