Belkin F7D8301

Belkin F7D8301 v1

Manuf (OEM/ODM): Arcadyan WG8117F22 2-LF-AK

FCC approval date: 16 March 2010
UPC: 722868813126 (UPC DB, On eBay)
Country of manuf.: China

Amazon image

ASIN
B0047T7AIU (, On Amazon, On CCC)

Type: wireless router

FCC ID: K7SF7D4301V1
IC ID: 3623A-F7D4301V1
PCB ID: 141811720000J

Power: 12 VDC, 2 A
Connector type: barrel

CPU1: Broadcom BCM4718A1
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Eon EN29LV640B-90TIP)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (EtronTech EM68B16CWPA-25H)

Expansion IFs: USB 2.0
USB ports: 2
JTAG: yes, 14-pin header, J2
Serial: yes, 4-pin header, populated, 3.3V TTL, (115200,8,N,1), J3

WI1 chip1: Broadcom BCM4718A1
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: soldered
WI2 chip1: Broadcom BCM43224
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL (internal)

ETH chip1: Broadcom BCM4718A1
Switch: Broadcom BCM53115
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1

abgn

Additional chips
4.9 to 5.9GHz Power Amplifier IC;Microsemi;LX5530;;2;
30V Dual N-Channel MOSFET;Matsuki Electric;ME4970;;1;
Low drop positive voltage regulator;STMicroelectronics;LD1117;;1;
Single Synchronous Step Down Controller;Texas Instruments;TPS51117;;1;

Stock bootloader: CFE 1.0.8e

Stock FW OS: Linux 2.6.22

TPFirmware supported: DD-WRT • (List), Tomato (Shibby) • (List | DLs)

Default SSID: belkin.XXXX (2 addl. devices)
, belkin.XXXX.5ghz
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 295 additional devices
of which 97 are Belkin devices

802dot11 OUI: 94:44:52 (17 E, 22 W)
Ethernet OUI: 94:44:52 (17 E, 22 W)

	FCC ID
Belkin F7D4301	K7SF7D4301V1

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

---

Play N600 HD WIreless Dual-band N Router

"P/N: 141811720000J REV: 01" is silkscreened on the board.

• On the TomatoUSB forums

It is reported that the device is working with the latest Toastman builds.

.. and it would seem to be supported by Shibby's Tomato builds

The default SSID patterns for this device appear to be belkin.XXXX

and belkin.XXXX.5ghz, where XXXX is the last two octets

of the LAN interface MAC (lower case hex letters).