Belkin F9K1001 v1
Belkin F9K1001 v1
Manuf (OEM/ODM): SerComm
Type: wireless router
FCC ID: K7SF9K1001V1
IC ID: 3623A-F9K1001V1
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Realtek RTL8196C
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Macronix MX25L1605)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (ESMT M12L64164A-5T)
Expansion IFs: none specified
WI1 chip1: Realtek RTL8188RE
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: U.FL
ETH chip1: Realtek RTL8196C
Switch: Realtek RTL8196C
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: belkin.XXX (20 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 295 additional devices
of which 97 are Belkin devices
802dot11 OUI: 08:86:3B (10 E, 14 W), 94:44:52 (17 E, 22 W)
Ethernet OUI: 08:86:3B (10 E, 14 W), 94:44:52 (17 E, 22 W)
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
Belkin F9K1001 v1 | Realtek | Realtek | |
Belkin F9K1001 v4 | Broadcom | Broadcom | |
Belkin F9K1001 v5 | Broadcom | Broadcom |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
N150 Wireless Router
• Support page
Flash chip looks like a MX25L1605
The included power adapter is a DVE DSA-12PFE-12 BUS 120100 (12V, 1A).
The default SSID follows the pattern of belkin.XXX where XXX is the last three hex digits of the WLAN MAC (lower case letters).