Belkin F9K1003
Belkin F9K1003 v1
Manuf (OEM/ODM): Arcadyan
Type: wireless router
FCC ID: K7SF9K1003V1
IC ID: 3623A-F9K1003V1
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Ralink RT3883 (500 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX25L6406EM2I-12G)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (EtronTech EM68B16CWPA-25H)
Expansion IFs: none specified
Serial: yes, 4-pin header, populated, 3.3V TTL, (57600,8,N,1), JP12
WI1 chip1: Ralink RT3883
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: soldered
ETH chip1: Ralink RT3883
Switch: Realtek RTL8367R
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
bgn
Stock bootloader: U-Boot 1.7.4 Ralink 3.5.2.0
Stock FW OS: Linux 2.6.22
Default SSID: belkin.XXX (20 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 295 additional devices
of which 97 are Belkin devices
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
N450 Wireless N+ Router
A triangular RoHS logo / indicator and "P/N: 141710520000J R01A" is silkscreened on the board.
2.4GHz only, 10/100/1000 Ethernet
The default SSID pattern is belkin.XXX where XXX is the last three hex
- digits of the wireless interface MAC address (lower case letters).
- An example SSID is belkin.618 where the WLAN MAC is 08:86:3B:27:16:18.
Serial
Pinout
^ to RAM © (GND) © (RxD) © (TxD) ® [3.3] NC J12 v to shield