Belkin F9K1115 v2
Belkin F9K1115 v2
Manuf (OEM/ODM): Edimax
Type: wireless router
FCC ID: K7SF9K1115V2
IC ID: 3623A-F9K1115V2
Power: 12 VDC, 2.5 A
Connector type: barrel
CPU1: Qualcomm Atheros QCA9558
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix Model?)
RAM1: 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond W9751G6KB-25 × 2)
Expansion IFs: USB 3.0, Mini PCIe (oversized)
Mini PCIe slots: 1
USB ports: 2
WI1 chip1: Qualcomm Atheros QCA9558
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 module: Edimax EW-7933MAC V1.0A
WI2 module IF: Mini PCIe (oversized)
WI2 chip1: Qualcomm Atheros QCA9880-2R4E
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Qualcomm Atheros QCA9558
Switch: Qualcomm Atheros QCA8337
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
abgn+ac
Additional chips
USB 3.0 Controller;EtronTech;EJ168A;;1;
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 295 additional devices
of which 97 are Belkin devices
802dot11 OUI: none specified
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
AC1750 DB Wi-Fi Dual-Band AC+ Gigabit Router
(F9K1115V2)
Manual (may not last at this URL or at this time, currently up as of 08/03/2013
There does not appear to be a v1 version of this model. Hooray.
Per the FCC photos...
- The WiSoC used is a QCA9558-AT4A.
- The QCA9880 (QCA9880-2R4E / QCA9880v2 [???]) wireless module appears to be using three Skyworks SE5003L1 / 5003L1 5GHz Power Amplifier modules.
- "EW-7933MAC V1.0A" and "P/C:C71-011" is silkscreened on the back of the wireless module, implying that the module is an Edimax EW-7933MAC.
- There is also a manuf. P/N of some sort on the board.. but it is not readable in the provided photos. I will, however, presume (erroneously?) that Edimax is indeed manufacturing this device (EW-7933AC ??)...
- An EtronTech EJ168A USB 3.0 controller is on-board.. providing the device with two USB 3.0 ports.
- The GbE Switch is a QCA8337-AL3C.
Per additional FCC docs...
- The device is using Airgain PCB antennas.
- 1x N2420S-T10-B100S2 (3.4 dBi gain @ 2.4GHz)
- 1x N2420S-T10-W50S2 (3.9 dBi gain @ 2.4GHz)
- 1x N2420S-T10-G190S2 (4.4 dBi gain @ 2.4GHz)
- 1x N5x20B-T1-B150U (5.8 dBi gain @ 5GHz)
- 1x N5x20B-T-G65U (5.3 dBi gain @ 5GHz)
- 1x N5x20B-T-W85U (5.3 dBi gain @ 5GHz)
- A Macronix Serial Flash is on the back of the board.
The default SSID patterns may be belkin.XXX and belkin.XXX.5GHz.
The power adapter shown in the FCC external photos is a (Belkin branded) DVE DSA-30PFB-12 FUS 120250 (100-240VAC ~ 50/60Hz, 0.8A -> 12VDC, 2.5A).
- Belkin F9K1115 v2:
Wi-Fi Certified : WFA19590 (as of 08/05/2013)
