BroMax WA304-UF
BroMax WA304-UF
FCC approval date: 18 April 2002
Type: access point
FCC ID: O6M-WA304-UF
Power: ? VDC, ? A
Connector type: barrel
CPU1: Ubicom IP2022
FLA1: ? MiB (Brand? Model?)
RAM1: ? MiB (Brand? Model?)
Expansion IFs: PCMCIA (16-bit)
PCMCIA slots: 1
WI1 module: BroMax WM300-IF
WI1 module IF: PCMCIA (16-bit)
WI1 chip1: Intersil ISL3871IN33
WI1 chip2: Intersil ISL3684
WI1 802dot11 protocols: b
WI1 antenna connector: none
ETH chip1: Ubicom IP2022
Switch: Marvell Model?
LAN speed: 100M
LAN ports: 4
b
802dot11 OUI: none specified
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Ubicom SoC's with specifications, see Ubicom.
11Mbps Wireless Access Point with 4-port 10/100M LAN Switch
This FCC ID defines two devices...
- WA304-UF
- 4-port Switch for LAN
- WA301-UF
- Single LAN port
"WA304-UF REV:XB" is silkscreened on the main board in the FCC photos.
"WM300-IF REV: XA" is silkscreened on the wireless module in the FCC photos.
- The ISL3871 used on the wireless module is an ISL3871IN33.
The FCC manual specifies the default SSID pattern as GROUPXXXXXX and default IP as 192.168.1.100.