Buffalo WAPS-APG600H
Buffalo WAPS-APG600H
Manuf (OEM/ODM): Edimax
Type: access point
FCC ID: FDI000000004, FDI04604022-0
Power: 12 VDC, 0.6 A
Connector type: barrel
PoE tag: 802.3af, standard
CPU1: Ralink RT3662
FLA1: ? MiB (Brand? Model?)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond W9751G6KB-25 × 2)
Expansion IFs: USB 2.0
USB ports: 2
Serial: RJ-45
WI1 chip1: Ralink RT3662
WI1 802dot11 protocols: an
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Ralink RT3092
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL, RP-SMA
ETH chip1: Ralink RT3662
ETH chip2: Realtek RTL8211E
ETH chip3: Realtek RTL8211E
LAN speed: 1G
LAN ports: 2
abgn
Default SSID: BUFFALO-XXXXXX_A (2 addl. devices)
, BUFFALO-XXXXXX_G (2 addl. devices)
Default login user: admin
Default login password: password
admin:password credentials used by 423 additional devices
of which 14 are Buffalo devices
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
This FCC ID appears to be used for both the WAPS-APG600H (Dual-band concurrent) and the WAPS-AG300H (Dual-band selectable).
"1244-00000854-50Z" is silkscreened on the board in the FCC photos.
Per the FCC manual, the default SSID patterns are presumed to be BUFFALO-XXXXXX_A and BUFFALO-XXXXXX_G (XXXXXX being the last three octets of some MAC used by the unit, upper case hex digits) . The devices are also presumed to use a 10:6F:3F (Buffalo) OUI.
