Buffalo WHR-HP-GN
Buffalo WHR-HP-GN
Manuf (OEM/ODM): Cameo
Type: wireless router
FCC ID: FDI-09101567-0
IC ID: 6102A-024
Power: 5 VDC, 2 A
Connector type: barrel
CPU1: Atheros AR7240
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX25L3205DMI-12G)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Mira P3S56D40ETP-G5)
Expansion IFs: none specified
Serial: yes, (115200,8,N,1)
WI1 chip1: Atheros AR9283
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: RP-SMA
ETH chip1: Atheros AR7240
Switch: Atheros AR7240
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: 0024A5XXXXXX (1 addl. devices)
Default IP address: 192.168.11.1
the IP 192.168.11.1 is used by 33 additional devices
of which 27 are Buffalo devices
Default login user: root
Default login password: blank
root:blank credentials used by 65 additional devices
of which 24 are Buffalo devices
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
The device is presumed to be manufactured by Cameo.
Review of the device on it186.com (decent photos)
- This device appears to be using the same board (and 2T2R capable WiFi IC [AR9283]) as the Buffalo WHR-HP-G300N.. despite being a single-stream (and single antenna) device.
On the DD-WRT forums (internal shot) Buffalo WHR-HP-GN / WHR-HP-G300N on the OpenWrt Forums
- Serial settings are 115200, 8, N, 1
Default login credentials and the IP is per Buffalo's manual.
The default SSID for the device appears to be the MAC address (no delimiters, upper case hex letters).