CastleNet ASW915N+
CastleNet ASW915N+
FCC approval date: 10 September 2009
Type: wireless router, dsl modem
FCC ID: RK9-ASW915N
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Broadcom BCM6358U
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX29LV640EBTI-70G)
RAM1: ? MiB (Mira Model?)
Expansion IFs: USB 2.0
USB ports: 1
WI1 chip1: Broadcom BCM4322
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
ETH chip1: Broadcom BCM6358U
Switch: Broadcom BCM5325E
LAN speed: 100M
LAN ports: 4
bgn
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 3 are CastleNet devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 0 are CastleNet devices
802dot11 OUI: none specified
| FCC ID | |
|---|---|
| DQ Technology VisionNet M505N | QMPM505N RK9-ASW915N |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
The FCC test report lists an additonal model of M505N (VisionNet M505N?) which is also pictured as having removable (RP-SMA connector) antennas. The ASW915N+ is pictured as having integral antennas.
"PN:2PB-AS9150-X20R(OSP)" and "ASW915N_X2" is silkscreened on the board in the FCC photos.
The device appears to be using a MX29LV640EBTI-70G Flash chip.. and this device also uses two SiGe 2528L / SE2528L 2.4GHz power amplifiers.
The default credentials in this entry are from the FCC manual.
