Celeno VXT1836
Celeno VXT1836
Manuf (OEM/ODM): Zinwell ZW-N5000
FCC approval date: 10 May 2013
Type: access point, station
FCC ID: Y7E-VXT1836000001
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Celeno-Ralink CL1830
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX29LV640EBTI-70G)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Nanya NT5TU32M16CG-25C)
Expansion IFs: none specified
WI1 chip1: Celeno-Ralink CL1830
WI1 802dot11 protocols: an
WI1 MIMO config: 3x3:3
WI1 antenna connector: none
ETH chip1: Celeno-Ralink CL1830
ETH chip2: IC+ IP101A
ETH chip3: IC+ IP101A
LAN speed: 100M
LAN ports: 2
an
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 0 are Celeno devices
802dot11 OUI: none specified
For a list of all currently documented Celeno (Ralink) chipsets with specifications, see Celeno.
VXT1836 Wireless Video Extender Kit - Video Bridge Unit
"ZW-N5000 Ver:05" is silkscreened on the board in the FCC photos.
- The device appears to be using three Skyworks (SiGe) SE5012T / 5012T 5GHz FEMs.
Per the FCC manual...
- The default credentials are admin:admin
- In AP mode..
- Default IP of 10.0.0.2 (w/ 255.0.0.0 Net Mask) *In STA mode..
- Default IP of 10.0.0.10 (w/ 255.0.0.0 Net Mask)*The default SSID pattern shown as an example is VXT1800'''XXXXXX
- XXXXXX is the last three octets of the BSSID (upper case letters)
- There are a fair number of hits for this pattern on WiGLE (93 w/ 80:1F:02 [Edimax] OUIs)
- The actual SSID pattern may be VXT1836'''XXXXXX
