Cisco AP541N
Cisco AP541N
Manuf (OEM/ODM): Delta Networks
FCC approval date: 25 September 2009
Country of manuf.: China
Type: access point
FCC ID: PD5AP541N01
IC ID: 3970A-AP541N01
Power: 12 VDC, 1.25 A
Connector type: barrel
CPU1: Brand? Model?
FLA1: 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Brand? Model?)
RAM1: 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Samsung Model?)
Expansion IFs: Mini PCI
Mini PCI slots: 1
Serial: yes, internal, 4-pin header, 3.3V TTL
WI1 module: unknown
WI1 module IF: Mini PCI
WI1 chip1: Broadcom BCM4342
WI1 802dot11 protocols: unspecified
WI1 antenna connector: none
ETH chip1: Brand? Model?
LAN speed: 1G
LAN ports: 1
abgn
Default SSID: cisco-data
, cisco-voice
Default IP address: 192.168.10.10
Default login user: cisco
Default login password: cisco
cisco:cisco credentials used by 14 additional devices
of which 14 are Cisco devices
802dot11 OUI: none specified
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Cisco Small Business Pro AP500 / Dual Band Single Radio Access Point
"2976336001" is silkscreened on the main board in the FCC photos.
- "2976306603" is silkscreened on the wireless module.
- The PBGA CPU and GbE PHY are covered w/ heatsinks, but are likely both Broadcom silicon
Per Cisco's datasheet, this device has 32 MB Flash and 64 MB RAM.
Default settings are per the FCC manual - they may be inaccurate..
Wi-Fi Certified : WFA7506 (as of 07/06/2009)
Probable used PSU(s)
The power supply shown in the FCC external photos is a DVE DSA-15P-12 US 120150.
| DVE DSA-15P-12 US 120150 (more) | |||||
|---|---|---|---|---|---|
| Input: 100-240 VAC, 0.5 A | |||||
| Input connector: NEMA 1-15P Style: small, horiz. Manuf. in: China Eff. level: 4 | |||||
| Output: 12 VDC, 1.25 A | |||||
| Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? | |||||
