Cisco DDR2200-CL
Cisco DDR2200-CL
Manuf (OEM/ODM): Gemtek
FCC approval date: 22 December 2009
Country of manuf.: China
Type: wireless router, analog phone gateway, dsl modem
FCC ID: MXF-ADV981119G
Power: 12 VDC, 1.67 A
Connector type: barrel
CPU1: Broadcom BCM6358KFBG
CPU2: Broadcom BCM6358KFBG
FLA1: ? MiB (Spansion Model?)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Nanya NT5DS16M16CS-5T)
RAM2: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Nanya NT5DS16M16CS-5T)
Expansion IFs: Mini PCI, USB 2.0, USB 2.0 (slave)
Mini PCI slots: 1
USB ports: 1
WI1 module: Gemtek WMIR-174G
WI1 module IF: Mini PCI
WI1 chip1: Ralink RT2561
WI1 chip2: Ralink RT2527
WI1 802dot11 protocols: bg
WI1 antenna connector: none (internal)
ETH chip1: Broadcom BCM6358KFBG
Switch: Marvell 88E6061
LAN speed: 100M
LAN ports: 4
bg
Flags: HomePNA 3.0 (coaxial), ADSL2+
Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 158 additional devices
of which 0 are Cisco devices
Default login user: admin
Default login password: 1PTV-ADM1N
802dot11 OUI: none specified
Ethernet OUI: 50:39:55
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
DDR2200-CL ADSL2+ Residential Gateway
Per FCC photos...
- There are two Broadcom SoCs on the board.
- both of which are a BCM6358KFBG
- The HomePNA controller is a CopperGate CG3011QIR-10.
- There is a Legerity chip on-board for VoIP support.
- The wireless module has a MAC label w/ a 00:26:82 (Gemtek) MAC on it.
This device is/was used by the following ISPs...
Default settings are per the FCC manual. They may very well be inaccurate.
- Additional login credentials of support:1PTV-SUPP0RT and user:user are specified.
- CenturyLink specifies the user login as user:user.
If the 50:39:55 OUI is used for the WLAN interface, the default SSID format may be CiscoXXXX (where XXXX is a number).
The power adapter shown in the FCC external photos is an Asian Power Devices Inc. DA-30H12 rev 1.2 (100-240VAC ~ 50-60Hz, 0.7A max. -> 12VDC, 2.5A).