Cisco Meraki MR12
Cisco Meraki MR12
Manuf (OEM/ODM): Senao
Type: access point
FCC ID: UDX-60013010
IC ID: 6961A-60013010
Power: 12 VDC, 1.5 A
Connector type: barrel
CPU1: Atheros AR7242 (400 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX25L12845EMI-10G)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Nanya NT5DS32M16DS-5T)
Expansion IFs: none specified
WI1 chip1: Atheros AR9283
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
ETH chip1: Atheros AR7242
ETH chip2: Atheros AR8021
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1
bgn
Stock FW OS: Linux 2.6.16.16
Default IP address: 10.128.128.128
the IP 10.128.128.128 is used by 3 additional devices
of which 1 are Cisco devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 340 additional devices
of which 1 are Cisco devices
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
"7016A0445001 Ver: 1.0" is silkscreened on the board in the FCC photos.
This device has one Gigabit Ethernet port (uplink) and one 10/100 port.
- CPU: Atheros AR7242 @400MHz
- Wireless: Atheros AR9283-AL1A 2T2R 802.11bgn
- Ethernet ports: Atheros AR8021-BL1E 1x GbE
- (w/ boot log and links to internal photos)
- Presumed 00:18:0A OUI..
Default settings are per the FCC manual.
