Cisco WAP561
Cisco WAP561 AK9
Manuf (OEM/ODM): Delta Networks
FCC approval date: 13 December 2012
Country of manuf.: China
Type: access point
FCC ID: PD5-WAP561, PD5-WAP551
IC ID: 3970A-WAP561
Power: ? VDC, ? A
Connector type: Ethernet (PoE)
PoE tag: 802.3af, standard
CPU1: Cavium CN3420 (600 MHz, 2 cores)
FLA1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Brand? Model?)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Nanya NT5TU32M16DG-AC × 2)
Expansion IFs: Mini PCIe
Mini PCIe slots: 2
WI1 module: unknown
WI1 module IF: Mini PCIe
WI1 chip1: Broadcom BCM43431
WI1 802dot11 protocols: abgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 module: unknown
WI2 module IF: Mini PCIe
WI2 chip1: Broadcom BCM43431
WI2 802dot11 protocols: abgn
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Cavium CN3420
ETH chip2: Broadcom Model?
LAN speed: 1G
LAN ports: 1
abgn
Additional chips
DualBand 802.11abgn Wireless LAN Front End;Skyworks;SiGe SE2594L;SiGe, SE2594L, 139DX;3;
Default IP address: 192.168.1.245
the IP 192.168.1.245 is used by 18 additional devices
of which 7 are Cisco devices
Default login user: cisco
Default login password: cisco
cisco:cisco credentials used by 14 additional devices
of which 14 are Cisco devices
802dot11 OUI: none specified
| FCC ID | |
|---|---|
| Cisco WAP551 | PD5-WAP551 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Cavium (Star) SoC's with specifications, see Cavium.
Dual-Radio 450Mbps 802.11n Access Point with PoE
Cisco Systems Wireless N-Dual Radio Selectable Band Access Point (WAP561AK9)
- Cisco WAP551: Selectable radio band (2.4 or 5 GHz)
- Cisco WAP561: Dual concurrent radios (2.4 and 5 GHz)
- Single radio (WAP551) or dual radio (WAP561) OFDM
This device is essentially identical to the Cisco WAP551 besides the additional radio (and additional included Mini PCIe slot to accommodate it).
- The Cisco logo is silkscreened on the top of the board in the FCC photos.
- "2976375903" is silkscreened on the bottom.
- "2976387400" is silkscreened on the wireless modules.
- The wireless modules are using three Skyworks (SiGe) SE2594L / 2594L Dual-Band WLAN FEMs.
- The wireless modules would appear to be using BCM43431... or something else other than BCM4331 with one extra character and the same specs..
The PoE injector used in the FCC filing is a PowerDsine PD-9001G/AC - an 802.3at midspan.
