D-Link DAP-2360

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

D-Link DAP-2360 A1

Manuf (OEM/ODM): Alpha Networks WAP-N08

FCC approval date: 12 October 2010
UPC: 790069345746 (UPC DB, On eBay)

Amazon image

ASIN
B004RJJHLI (Flag of the United States.svg, On Amazon, On CCC)

Type: access point

FCC ID: KA2AP2360A1
IC ID: 4216A-AP2360A1
PCB ID: 8WAPN08.2A1G

Power: 5 VDC, 2.5 A
Connector type: barrel
PoE tag: 802.3af, standard

CPU1: Atheros AR7242
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W25Q128BVFG)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (EtronTech EM6AB160TSA-5G)

Expansion IFs: none specified

WI1 chip1: Atheros AR9283
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: RP-SMA

ETH chip1: Atheros AR7242
LAN speed: 100M
LAN ports: 1

bgn

Default SSID: dlink (38 addl. devices)
Default IP address: 192.168.0.50
the IP 192.168.0.50 is used by 63 additional devices
of which 63 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 344 additional devices
of which 180 are D-Link devices

802dot11 OUI: none specified

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.


AirPremier N PoE Access Point with Plenum-rated Chassis

 • Support page

"8WAPN08..2A1G" is silkscreened on the board in the FCC photos.

Per the manual, the default SSID is dlink.
Revision A1
  • CPU: Atheros AR7242-AH1A (MIPS 24K 32-bit @400MHz)
  • Flash: Winbond W25Q128BVFG (16MB)
  • Memory: M13S5121632A-5TG2S @200MHz (DDR400 64MB)
  • WiFi: Atheros AR9283 2x2 MIMO 802.11n (2.4GHz)
  • Ethernet: Atheros AR8021 (Gigabit, but seems CPU can handle
only 100Mb, don't know how is connected to CPU)
Backdoor
  1. connect to telnet service
  2. authorize using your login and password
  3. enter secret command "alpha sdd21234"
  4. enter secret command "shell"
  5. Welcome to root access!