D-Link DAP-2662 rev A1

D-Link DAP-2662 rev A1

Manuf (OEM/ODM): Edimax

FCC approval date: 22 March 2019
Country of manuf.: China
Series: AC1200

Type: access point

FCC ID: KA2AP2662A1
PCB ID: 1246-01000243-50Z_ES

Power: 12 VDC, 2.5 A
Connector type: barrel
PoE tag: 802.3af, standard

CPU1: Qualcomm Atheros QCA9563 (750 MHz)
FLA1: ? MiB (Brand? Model?)
RAM1: ? MiB (Winbond W971GG6KB-25)

Expansion IFs: none specified

WI1 chip1: Qualcomm Atheros QCA9563
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Qualcomm Atheros QCA9886
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 2x2:2
WI2 antenna connector: none

ETH chip1: Atheros AR8033
LAN speed: unspecified

abgn+ac

Additional chips
2.4GHz Front End Module;Skyworks;SKY85309-11;SKY85309-11, 731NJ, 1731 MY;2;
5GHz Power Amplifier IC;Skyworks;SKY85728-11;SKY85728-11, 721JY, 1721, MY;2;

Default SSID: dlink (38 addl. devices)
Default IP address: 192.168.0.50
the IP 192.168.0.50 is used by 63 additional devices
of which 63 are D-Link devices

802dot11 OUI: none specified

For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

---

Dual Band Gigabit PoE Access Point

"1246-01000243-50Z_ES" (or similar) is silkscreened on the board in the FCC photos.

• Web GUI: http://dap2662xxxx.local