D-Link DAP-2680 rev A1

D-Link DAP-2680 A1
Availability: new

Manuf (OEM/ODM): Alpha Networks

FCC approval date: 27 February 2018
Country of manuf.: China
Series: AC1750

Type: access point

FCC ID: KA2AP2680A1
IC ID: 4216A-AP2680A1

Power: 12 VDC, 2 A
Connector type: barrel
PoE tag: 802.3at, standard

CPU1: Qualcomm Atheros QCA9558 (720 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond Model?)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Winbond W971GG6SB-25 × 2)

Expansion IFs: none specified

WI1 chip1: Qualcomm Atheros QCA9558
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 chip1: Qualcomm Atheros QCA9984
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL

ETH chip1: Qualcomm Atheros QCA9558
LAN speed: 1G
LAN ports: 1

abgn+ac

Additional chips
2.4GHz WLAN/BT FEM;Skyworks;SKY85303-11;SKY11, 85303, 708EA;3;
5GHz RF Front End Module;Qorvo (RFMD);RFFM4552;Q, 4552, ALNF;3;

Default IP address: 192.168.0.50
the IP 192.168.0.50 is used by 63 additional devices
of which 63 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 345 additional devices
of which 180 are D-Link devices

802dot11 OUI: none specified

For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

---

• 1300 Mbps - 4-stream 802.11ac device (433Mbps per stream),

• 450 Mbps - max. PHY rate for the 40MHz wide 2.4GHz channel = 1750 Mbps class

Wireless AC1750 Wave 2 Dual-Band PoE Access Point

Only three of the QCA9984's tx/rx chains are actually

implemented so this is 3x3:3 for 5GHz.

See also: D-Link DIR-2680