D-Link DCH-M225 rev A1
D-Link DCH-M225 A1
Manuf (OEM/ODM): Alpha Networks WAP-N22 A1
FCC approval date: 07 February 2014
Country of manuf.: China
Type: repeater, audio streamer
FCC ID: KA2CHM225A1
IC ID: 4216A-CHM225A1
Power: 100-240 VAC ~ 50-60 Hz, 0.3 A
Connector type: NEMA 1-15P
CPU1: MediaTek MT7620A (580 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Winbond W25Q64VSIG)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Winbond W9751G6KB-25I)
Expansion IFs: none specified
WI1 chip1: MediaTek MT7620A
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
bgn
Additional chips
Audio codec;Wolfson Microelectronics;WM8960G;WM8960G, 2CA0, PDR;1;
Flags: Audio out (3.5mm)
Default SSID: dlink-XXXX (35 addl. devices)
Default IP address: 192.168.0.50
the IP 192.168.0.50 is used by 63 additional devices
of which 63 are D-Link devices
802dot11 OUI: none specified
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
Wi-Fi Audio Extender
- "WAP-N22", "REV-A1", and "8WAPN22..1A1G" would appear
- to be silkscreened on the main board in the FCC photos.
- The shown Flash chip used is from Winbond ..
- it looks to be a W25Q64<...> (8 MB)
Default settings in this entry are per the FCC manual.
- They may be, to some degree, inaccurate.
Wi-Fi Certified : WFA52668 (as of 02/11/2014)