D-Link DIR-300 rev D1

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

D-Link DIR-300 D1
Availability: common

Manuf (OEM/ODM): SGE AP699E9N .BT1738-4-DL rev 1.0

FCC approval date: 13 August 2013
Country of manuf.: China

Type: wireless router

FCC ID: KA2IR300D1

Power: 12 VDC, 0.5 A
Connector type: barrel
Conn. measurements: 3.8 mm (OD), 1 mm (ID), 10 mm (LEN)

CPU1: Realtek RTL8196E
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX25L3206E)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (EtronTech EM63A165TS-6G)

Expansion IFs: none specified
Serial: yes, 4-pad header, J1

WI1 chip1: Realtek RTL8188ER
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Realtek RTL8196E
Switch: Realtek RTL8196E
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bgn

Default SSID: DIR-300
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 220 are D-Link devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 75 are D-Link devices

802dot11 OUI: none specified

For a list of all currently documented Realtek chipsets with specifications, see Realtek.


N150 Wireless Router

"AP699E9N.BT1738-4-DL" and "REV1.0" appears to

be silkscreened on the board in the FCC photos.

FCC docs state that this FCC ID: KA2IR300D1 also covers:

Serial

The serial port on board marked "J1". Levels is TTL 3.3V.

Pins: 1 - VCC, 2 - GND, 3 and 4 - Data (Rx and Tx).

Baud rate: 38400 Data bits: 8 Parity: none Stop bits: 1

Images