D-Link DIR-620 rev C1
D-Link DIR-620 S/C1
Country of manuf.: China
Type: wireless router
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Broadcom BCM5358UB0 (530 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX25L6406EM2I-12G)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (EtronTech EM6AB160TSD-5G)
Expansion IFs: USB 2.0
USB ports: 1
Serial: yes, internal, 4-pin header, unpopulated
WI1 chip1: Broadcom BCM5358UB0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Broadcom BCM5358UB0
Switch: Broadcom BCM5358UB0
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
TPFirmware supported: Vampik (wl500g mod), FreshTomato • (List | DLs)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 220 are D-Link devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1327 additional devices
of which 75 are D-Link devices
802dot11 OUI: none specified
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
D-Link DIR-620 rev A1 | Ralink | Ralink | |
D-Link DIR-620 rev A1A | Realtek | Realtek | |
D-Link DIR-620 rev B1 | Ralink | Ralink | |
D-Link DIR-620 rev C1 | Broadcom | Broadcom | |
D-Link DIR-620 rev D1 | Ralink | Ralink | |
D-Link DIR-620 rev E1 | Realtek | Realtek | |
D-Link DIR-620 rev F1 | MediaTek | MediaTek | |
D-Link DIR-620 rev G1 | Broadcom | Broadcom |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
This device shares the same board as the D-Link DIR-615 rev K2,
- but the USB portion is populated on this model.
This device is presumably sold mainly (only?) in Russia and Ukraine.
Support firmware by Vampik FW: DIR620C1-3.0.5-r5010M
- Simple flash from web interface of D-Link stock firmware.
See also D-Link DIR-620..
Console dumps
$ cat /proc/mtd dev: size erasesize name mtd0: 00020000 00010000 "boot" mtd1: 007c0000 00010000 "Linux" mtd2: 0068137c 00010000 "rootfs" mtd3: 00010000 00010000 "rgdb" mtd4: 00010000 00010000 "nvram" mtd5: 00800000 00010000 "all"
after flash Oleg`s firmware
root]$ cat /proc/mtd dev: size erasesize name mtd0: 00020000 00010000 "boot" mtd1: 007d0000 00010000 "linux" mtd2: 006c6588 00010000 "rootfs" mtd3: 00010000 00010000 "nvram" mtd4: 00240000 00010000 "flashfs"
and cpuinfo
root]$ cat /proc/cpuinfo system type : Broadcom BCM5357 chip rev 2 pkg 8 processor : 0 cpu model : MIPS 74K V4.9 BogoMIPS : 264.19 wait instruction : no microsecond timers : yes tlb_entries : 64 extra interrupt vector : no hardware watchpoint : yes ASEs implemented : mips16 dsp shadow register sets : 1 VCED exceptions : not available VCEI exceptions : not available
frequency 530Mhz
$ nvram show | grep clkfreq size: 17883 bytes (14885 left) clkfreq=530,176,88