D-Link DIR-625 A1
FCC approval date: 26 April 2006
Country of manuf.: China
Power: 5 VDC, 3 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9 mm (LEN)
CPU1: Ubicom IP3023
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Spansion S29GL032M90TFIR4)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Hynix HY57V281620ETP-H)
Expansion IFs: USB, Mini PCI
Mini PCI slots: 1
USB ports: 1
WI1 module: Cameo WLN-1306
WI1 module IF: Mini PCI
WI1 chip1: Atheros AR5416
WI1 chip2: Atheros AR2122
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL, RP-SMA
ETH chip1: Ubicom IP3023
Switch: Realtek RTL8305SC
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Ubicom SoC's with specifications, see Ubicom.
• Support page
Only a 2.5A power supply is needed, if not using USB port. Similar models from D-Link, which do not feature USB port, come with 2.5A AC adapter.
"21514AV11C1*1A1" "AV11C1 REV.A1" is silkscreened on WI1 board top.
"DIR-635A1 Rev:A1" "21514DR635A11A1" is silkscreened on system board top.
Full-speed USB transceiver is Sipex 5301CY