D-Link DSL-2740B rev F1
D-Link DSL-2740B F1
Manuf (OEM/ODM): Delta Networks
FCC approval date: 27 July 2011
Country of manuf.: China
Type: wireless router, dsl modem
FCC ID: KA2SL2740BF1
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Broadcom BCM63281 (300 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX25L6406EN1-12G)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Mira P3R12E4JFF-G8E)
Expansion IFs: none specified
WI1 chip1: Atheros AR9287
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Broadcom BCM63281
Switch: Broadcom BCM63281
LAN speed: 100M
LAN ports: 4
bgn
Flags: ADSL2+
802dot11 OUI: none specified
| FCC ID | |
|---|---|
| D-Link DSL-2750B rev B1 | KA2SL2740BF1 |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
"2976380401" and "A610A234006R_R6" is silkscreened on the board in the FCC photos.
- This device appears to use Broadcom BCM63281.
Additional models of..
- DSL-2750B (Annex A, USB, 'dying gasp' feature)
- DSL-2740B (Annex A, no USB, without 'dying gasp')
- DSL-2740U (Annex A, no USB, without 'dying gasp')
- DSL-2741B (Annex B, USB, 'dying gasp' feature)
- DSL-2741U (Annex B, USB, 'dying gasp' feature)
See also
- Broadcom BCM63281/BCM43225
- Broadcom BCM63281/BCM43225
- D-Link DSL-2750B rev B1 (AW4339U)
- D-Link DSL-2740R rev A1 • TrendChip/Ralink
- D-Link DSL-2740R rev B1 • TrendChip/Ralink
- D-Link DSL-2740B rev C2 • OpenWrt
- Broadcom BCM6358/BCM4321, 4MB/32MB
- Flash: Macronix MX29LV320CTTC-70G
- D-Link DSL-2741B rev C2 • OpenWrt
- Broadcom BCM6358/BCM4321, 4MB/32MB
- Broadcom BCM6358SR/BCM4321/RTL8306G
- Flash: Macronix MX29LV640ETTI-70G (8MB)
- RAM: Mira P3S56D40ETP (32MB)
- Broadcom BCM6358/BCM4321, 16MB/32MB
