D-Link DWL-2700AP rev B1
D-Link DWL-2700AP B1
Manuf (OEM/ODM): Alpha Networks
FCC approval date: 14 August 2006
Country of manuf.: Taiwan
Type: access point
FCC ID: KA2DWL2700APB1
IC ID: 4216A-WL2700A3
Power: 48 VDC, ? A
Connector type: Ethernet (PoE)
PoE tag: 802.3af, standard
CPU1: Brand? Model?
FLA1: ? MiB (Spansion Model?)
RAM1: ? MiB (Winbond Model? × 2)
Expansion IFs: none specified
WI1 chip1: Atheros Model?
WI1 802dot11 protocols: bg
WI1 antenna connector: unknown
ETH chip1: Brand? Model?
LAN speed: 100M
LAN ports: 1
bg
Flags: outdoor
Default SSID: dlink (38 addl. devices)
Default IP address: 192.168.0.50
the IP 192.168.0.50 is used by 63 additional devices
of which 63 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 338 additional devices
of which 180 are D-Link devices
802dot11 OUI: none specified
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
Wireless 802.11g Outdoor Access Point and Bridge
• Support page
"8WAPD31..1A1G" and "WAPD31 REV-A1" appears to be silkscreened on the board in the FCC photos.
This device would apppear to be using an Intel XScale processor and an Atheros single-chip Wi-Fi IC.
Default settings (including the SSID) are per the FCC manual.
The power adapter shown in the FCC photos is a Tiger Power TG-4201-48V-IV (100-240VAC ~ 50-60Hz, 1.6A max. -> 48VDC, 0.875A)..
